修复你的物品 社区 商店

How to open the Fitbit Ionic

简介

Use this guide to open your Fitbit Ionic for repairs.

你所需要的

  1. How to open the Fitbit Ionic, How to open the Fitbit Ionic: 步骤 1 中的图像 1，2 How to open the Fitbit Ionic, How to open the Fitbit Ionic: 步骤 1 中的图像 2，2

    • Before starting, take your Fitbit Ionic off the charger and power it down.

    • Feel free to attach or remove the watch band as needed to provide more control as you make repairs.

    翻译

  2. How to open the Fitbit Ionic: 步骤 2 中的图像 1，1

    • Heat an iOpener and apply it on the display for at least two minutes to soften the adhesive underneath.

    • The adhesive of the Fitbit Ionic is very strong. You may need to reheat the iOpener and repeat this procedure several times until the display adhesive gets loose enough.

    翻译

  3. How to open the Fitbit Ionic: 步骤 3 中的图像 1，3 How to open the Fitbit Ionic: 步骤 3 中的图像 2，3 How to open the Fitbit Ionic: 步骤 3 中的图像 3，3

    • Insert a technician's razor with a flat blade into the small gap between the watch case and the display.

    • Cut through the adhesive on the upper side of the Fitbit Ionic.

    翻译

  5. How to open the Fitbit Ionic: 步骤 4 中的图像 1，2 How to open the Fitbit Ionic: 步骤 4 中的图像 2，2

    • Use a technician's razor with a flat blade to pry up the top edge of the display and create a small gap.

    翻译

  6. How to open the Fitbit Ionic: 步骤 5 中的图像 1，3 How to open the Fitbit Ionic: 步骤 5 中的图像 2，3 How to open the Fitbit Ionic: 步骤 5 中的图像 3，3

    • Insert two opening picks underneath the top left and the top right corner.

    • Leave the opening picks in place to prevent the adhesive from resealing.

    • Remove the razor blade.

    翻译

  7. How to open the Fitbit Ionic: 步骤 6 中的图像 1，2 How to open the Fitbit Ionic: 步骤 6 中的图像 2，2

    • Insert a third opening pick underneath the top right corner and slide it along the right edge of the display.

    • Leave the opening pick in the bottom right corner to prevent the adhesive from resealing.

    • If cutting becomes too difficult, reheat and reapply the iOpener.

    翻译

  8. How to open the Fitbit Ionic: 步骤 7 中的图像 1，2 How to open the Fitbit Ionic: 步骤 7 中的图像 2，2

    • Insert a fourth opening pick underneath the top left corner and slide it along the left edge of the display.

    • Leave the opening pick in bottom left corner to prevent the adhesive from resealing.

    • Do not remove the display assembly all the way yet—it's still connected to the mainboard.

    翻译

  9. How to open the Fitbit Ionic: 步骤 8 中的图像 1，2 How to open the Fitbit Ionic: 步骤 8 中的图像 2，2

    • Carefully fold the display assembly in the direction of the bottom edge.

    翻译
结论

To reassemble your device, follow these instructions in reverse order.

You’ll need replacement adhesive to reattach components when reassembling the device.

Opening didn’t go as planned? Check out our Answers community for troubleshooting help.

另外一个人完成了本指南。

作者

与1其他贡献者

Adriana Zwink

于12/18/19注册

48,052 声望

创作了167篇指南

徽章: 35

+ 32更多徽章

团队

iFixit iFixit 的会员

Staff

135 名成员

创作了16,731篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 10

过去 30 天： 39

总计 3,784