修复你的物品 社区 商店

Hover-1 Coast Controller Battery Replacement

简介

In order for your Hover-1 Coast to be used, you must have a functioning controller. It is essential to have a fully functioning controller for the Hover-1 Coast to be used to it's full potential. This guide is not too difficult and can be done by anyone.

你所需要的

  1. Hover-1 Coast Controller Battery Replacement, Controller Battery: 步骤 1 中的图像 1，3 Hover-1 Coast Controller Battery Replacement, Controller Battery: 步骤 1 中的图像 2，3 Hover-1 Coast Controller Battery Replacement, Controller Battery: 步骤 1 中的图像 3，3

    • Identify the three screws and using a Phillips #1 screwdriver loosen the the screws.

    • Remove the three screws.

    编辑

  2. Hover-1 Coast Controller Battery Replacement: 步骤 2 中的图像 1，3 Hover-1 Coast Controller Battery Replacement: 步骤 2 中的图像 2，3 Hover-1 Coast Controller Battery Replacement: 步骤 2 中的图像 3，3

    • Pull the backside of the controller off.

    • The inside of the controller should look like this.

    • The marked area is the battery.

    编辑

  4. Hover-1 Coast Controller Battery Replacement: 步骤 3 中的图像 1，1

    • Remove the black foam piece covering the battery.

    编辑

  5. Hover-1 Coast Controller Battery Replacement: 步骤 4 中的图像 1，2 Hover-1 Coast Controller Battery Replacement: 步骤 4 中的图像 2，2

    • Desolder the battery connections from the motherboard.

    编辑

  6. Hover-1 Coast Controller Battery Replacement: 步骤 5 中的图像 1，2 Hover-1 Coast Controller Battery Replacement: 步骤 5 中的图像 2，2

    • Using a plastic opening tool, pry the battery off the motherboard.

    • The inside of the controller should look like this.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 4

过去 30 天： 13

总计 396