跳转到主内容

配件

没有特定配件。

  1. 这个步骤还没有翻译 帮忙翻译一下

    Using a Phillips #1 screwdriver, remove the six 15mm screws on the outer ring of the back of the fan holding the frame together. The screw channel is long and it is recommended to use a screwdriver with a long shaft or a screwdriver with a skinnier handle. The screw channel is long and it is recommended to use a screwdriver with a long shaft or a screwdriver with a skinnier handle.
    • Using a Phillips #1 screwdriver, remove the six 15mm screws on the outer ring of the back of the fan holding the frame together.

    • The screw channel is long and it is recommended to use a screwdriver with a long shaft or a screwdriver with a skinnier handle.

  2. 这个步骤还没有翻译 帮忙翻译一下

    Pry apart the blade cover from the body of the fan to access the inside. Pry apart the blade cover from the body of the fan to access the inside. Pry apart the blade cover from the body of the fan to access the inside.
    • Pry apart the blade cover from the body of the fan to access the inside.

  3. 这个步骤还没有翻译 帮忙翻译一下

    Remove the two 36mm  screws on the metal plate behind the blades using the Phillips #1 screwdriver. Remove the two 36mm  screws on the metal plate behind the blades using the Phillips #1 screwdriver.
    • Remove the two 36mm screws on the metal plate behind the blades using the Phillips #1 screwdriver.

  4. 这个步骤还没有翻译 帮忙翻译一下

    Carefully pull the motor forward out of its resting position and tilt it forward revealing the back of the motor. Beware of the wires attached to the back of the motor.
    • Carefully pull the motor forward out of its resting position and tilt it forward revealing the back of the motor.

    • Beware of the wires attached to the back of the motor.

  5. 这个步骤还没有翻译 帮忙翻译一下

    Using the Phillips #1 screwdriver, remove the two 37mm screws on the back of the motor. Beware that there is a nut holding the screw in place on the opposite side of the motor. Beware once the screw is removed the metal brace where the screws are located will come off.
    • Using the Phillips #1 screwdriver, remove the two 37mm screws on the back of the motor.

    • Beware that there is a nut holding the screw in place on the opposite side of the motor.

    • Beware once the screw is removed the metal brace where the screws are located will come off.

  6. 这个步骤还没有翻译 帮忙翻译一下

    Carefully remove the circular motor from the square holder. The fan blades will still be connected to the circular motor.
    • Carefully remove the circular motor from the square holder.

    • The fan blades will still be connected to the circular motor.

  7. 这个步骤还没有翻译 帮忙翻译一下

    Remove the felt washer, metal washer, and the rubber stopper from the axle. Remove the felt washer, metal washer, and the rubber stopper from the axle. Remove the felt washer, metal washer, and the rubber stopper from the axle.
    • Remove the felt washer, metal washer, and the rubber stopper from the axle.

  8. 这个步骤还没有翻译 帮忙翻译一下

    Remove the motor and replace it with the new part.
    • Remove the motor and replace it with the new part.

    • Consider using a lubricant to insert the new motor.

终点

10等其他人完成本指南。

2条评论

What is the motor parts details to procure elsewhere?

patra gyanesh - 回复

Hi informative guide but first how do we get the new motor how do you remove the blade nut to remove the blade from the old motor shaft

Dave Gordon - 回复

添加评论

浏览统计数据:

过去的24小时: 3

过去的7天: 24

过去的30天: 81

总计 3,819