跳转到主内容
英语
中文

正翻译步骤 5

步骤 5
Using the Phillips #1 screwdriver, remove the two 37mm screws on the back of the motor. Beware that there is a nut holding the screw in place on the opposite side of the motor. Beware once the screw is removed the metal brace where the screws are located will come off.
  • Using the Phillips #1 screwdriver, remove the two 37mm screws on the back of the motor.

  • Beware that there is a nut holding the screw in place on the opposite side of the motor.

  • Beware once the screw is removed the metal brace where the screws are located will come off.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可