修复你的物品 社区 商店

Hipstreet Equinox 2 Motherboard Replacement

简介

If your motherboard gets broken by a bad fall or damage while replacing another part it will need to be replaced. Please note that all data is on the motherboard so you will lose your data.

你所需要的

  1. Hipstreet Equinox 2 Motherboard Replacement, Rear Case: 步骤 1 中的图像 1，1

    • Remove the two 3mm screws using a PH00 screwdriver.

    翻译

  2. Hipstreet Equinox 2 Motherboard Replacement: 步骤 2 中的图像 1，1

    • Use the blue plastic opening tool to gently pry the back case off.

    翻译

  4. Hipstreet Equinox 2 Motherboard Replacement, Motherboard: 步骤 3 中的图像 1，1

    • Unsolder these wires from the motherboard, it is a good idea to label these wires as you remove them according to the picture to the left.

    翻译

  5. Hipstreet Equinox 2 Motherboard Replacement: 步骤 4 中的图像 1，1

    • Remove contact strips by lifting gently on the clip indicated in this picture, then pulling strip out of the clip.

    翻译

  6. Hipstreet Equinox 2 Motherboard Replacement: 步骤 5 中的图像 1，1

    • Remove the 3.5mm screws located at these locations shown on the picture by using the PH00 screwdriver.

    翻译

  7. Hipstreet Equinox 2 Motherboard Replacement: 步骤 6 中的图像 1，1

    • Gently lift the motherboard out of the tablet, make sure no wires are still caught or attached while you lift the motherboard.

    翻译
结论

To reassemble your device, follow these instructions in reverse order.

作者

与5其他贡献者

Brandon Snodgrass

于01/29/15注册

410 声望

创作了4篇指南

徽章: 6

+ 3更多徽章

团队

Clemson, Team 15-8, Shirley Winter 2015 Clemson, Team 15-8, Shirley Winter 2015 的会员

CLEM-SHIRLEY-W15S15G8

5 名成员

创作了12篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 0

总计 354