修复你的物品 社区 商店

Hand-Held Blender Motor Replacement

简介

The fix is needed when the motor is worn out and overheats when used. To replace the old motor for a new one a Philips screwdriver (2mm), Tri-head screwdriver (2mm) and a soldering iron are needed. Also, you will need a new motor.

你所需要的

  1. Hand-Held Blender Motor Replacement, Motor: 步骤 1 中的图像 1，1

    • Place the product on a clean and empty surface.

    编辑

  2. Hand-Held Blender Motor Replacement: 步骤 2 中的图像 1，1

    • Twist the attachment with the blades from the base of the blender.

    编辑

  3. Hand-Held Blender Motor Replacement: 步骤 3 中的图像 1，1

    • Unscrew the Tri-point screw (2mm) on the top to disassemble the top part of the casing.

    编辑

  5. Hand-Held Blender Motor Replacement: 步骤 4 中的图像 1，1

    • Unscrew the Phillips (2mm) connecting the middle part of the casing with the bottom part.

    编辑

  6. Hand-Held Blender Motor Replacement: 步骤 5 中的图像 1，1

    • Use force to twist the middle part from the bottom part of the casing OR use spudgers to wiggle open the product.

    • This reveals the motor.

    编辑

  7. Hand-Held Blender Motor Replacement: 步骤 6 中的图像 1，1

    • Lift the motor out of the casing.

    • Unscrew the Phillips (2mm) to disconnect the motor from the plastic part that transfers the motor rotations to the blade.

    编辑

  8. Hand-Held Blender Motor Replacement: 步骤 7 中的图像 1，1

    • With a soldering iron disconnect the wires coming from the motor from the PCB.

    • Refer to this How to Solder and Desolder Connections guide to find more information on proper soldering techniques.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

1指南评论

Model WST2024E blender counter model. Heavey glass 1.5 Liter. 3 SPD. plus pulse.

Need to either replace brushes or motor

T.A. MacMillan - 回复

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 13

过去 30 天： 60

总计 4,421