修复你的物品 社区 商店

Google Pixel 3a XL Midframe Replacement

仅作为前提条件
本指南仅用作其他指南的先决条件。不能单独食用。

简介

This guide is a pre-requisite step for other Pixel 3a XL guides. It describes the process of removing the midframe between the screen and the rest of the phone’s internals.

你所需要的

  1. Google Pixel 3a XL Midframe Replacement, Midframe: 步骤 1 中的图像 1，1
    在这个步骤中使用的工具：
    Magnetic Project Mat
    $19.95
    购买

    • Remove the following 4.3mm screws:

    • 14 silver T3 Torx screws

    • 2 black T3 Torx screws

    • Due to manufacturing tolerances, a T4 Torx driver may fit better into these T3 screws.

    • Throughout this repair, keep track of each screw and make sure it goes back exactly where it came from.

    翻译

  2. Google Pixel 3a XL Midframe Replacement: 步骤 2 中的图像 1，3 Google Pixel 3a XL Midframe Replacement: 步骤 2 中的图像 2，3 Google Pixel 3a XL Midframe Replacement: 步骤 2 中的图像 3，3

    • The midframe is still held in place by plastic clips.

    • Insert an opening pick into the seam along the bottom of the phone.

    • Slide the pick along the seam to release the clips holding the midframe to the rest of the phone.

    翻译

  4. Google Pixel 3a XL Midframe Replacement: 步骤 3 中的图像 1，3 Google Pixel 3a XL Midframe Replacement: 步骤 3 中的图像 2，3 Google Pixel 3a XL Midframe Replacement: 步骤 3 中的图像 3，3

    • Slide the opening pick along the left and right edges of the phone to release the midframe clips there.

    • Once the clips along the bottom of the phone are separated, the flat edge of the opening pick should be enough to separate the rest of the clips.

    • Lift up the bottom edge of the midframe but don’t completely remove it yet. The midframe is still connected to the phone by a fragile cable.

    翻译

  5. Google Pixel 3a XL Midframe Replacement: 步骤 4 中的图像 1，2 Google Pixel 3a XL Midframe Replacement: 步骤 4 中的图像 2，2

    • Use a spudger to pry up and detach the proximity sensor cable from the motherboard.

    翻译

  6. Google Pixel 3a XL Midframe Replacement: 步骤 5 中的图像 1，1

    • Remove the midframe from the phone.

    翻译

  7. Google Pixel 3a XL Midframe Replacement: 步骤 6 中的图像 1，2 Google Pixel 3a XL Midframe Replacement: 步骤 6 中的图像 2，2

    • During reassembly, align the top edge of the midframe with the top of the phone, then use a spudger to carefully press the proximity sensor cable connector onto its socket.

    • This takes a bit of patience and finesse. Once you have the connector aligned, you can also use a finger to gently press the connector onto the socket.

    翻译
结论

To reassemble your device, follow these instructions in reverse order.

作者

与5其他贡献者

Taylor Dixon

于06/26/18注册

67,188 声望

创作了94篇指南

徽章: 40

+ 37更多徽章

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 2

过去 30 天： 2

总计 61