简介

In this guide the repairer replaces the speaker of the device by disassembling the device further to expose the motherboard and speaker.

Prerequisite Guide:

Disassembling Garmin Nuvi 370 Into Core Components

Tools Used:

  • Fine Point Tweezers
  • Spudger

Estimated Duration: 10 minutes

配件

无需配件。

  1. After following the instructions in the main dis-assembly guide, you should have the screen detached from the motherboard.
    • After following the instructions in the main dis-assembly guide, you should have the screen detached from the motherboard.

    添加评论

  2. Use the tweezers or the spudger to lift the tan latch off the ribbon cable (ZIF connector)and gently pull out the ZIF connector and cable from underneath the opened latch.
    • Use the tweezers or the spudger to lift the tan latch off the ribbon cable (ZIF connector)and gently pull out the ZIF connector and cable from underneath the opened latch.

    添加评论

  3. 传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • The motherboard will now freely separate from the back casing; lay it flat next to the housing.

    添加评论

    • Detach blue speaker cable from motherboard.

      • Battery cable is detached in this picture, and it is not required to do so to install a new speaker.

    添加评论

    • Detach speaker from casing and insert new, functional speaker.

      • Battery is removed in the picture and is not required for the installation of a new speaker.

    添加评论

结论

To reassemble your device, follow these instructions in reverse order.

Matt West

于2013年04月18日注册

22 信誉积分

创作了4篇指南

团队

Cal Poly, Team 13-65, Johann Spring 2013 Cal Poly, Team 13-65, Johann Spring 2013 的会员

CPSU-JOHANN-S13S13G65

3 名成员

创作了6篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 1

总计 247