你所需要的
-
-
-
Locate a spot in the middle of the rain garden where the soil is bear/free from plants.
询问修复机器人
-
-
-
At the selected location, use a post hole digger to make a hole for the node.
-
Use a tape measure to make sure the hole is 3 feet deep.
-
Fill the first bucket with topsoil
-
When the soil begins to look like clay, switch to filling the second bucket
-
-
-
-
Set the GI node into the 3 ft hole.
-
Pack the topsoil from the first bucket around the node to make sure it is secure in place. You shouldn't need to use any soil from the second bucket
-
-
-
Fill out the deployment form on AirTable.
-
Once installed, confirm the GI node is reporting to the internet by going to its designated website.
-
-
