Front Panel Assembly Replacement - iFixit 维修指南

简介

This guide will walk you through how you remove the front panel assembly which contains the screen along with the front glass and capacitive buttons.

你所需要的

步骤 1 Front Panel Assembly

Front Panel Assembly Replacement, Front Panel Assembly: 步骤 1 中的图像 1，1

Insert the spudger under the capacitive button panel, and slide the spudger all the way around.
You will want to heat up the screen edges with the iOpener to help facilitate removal.

步骤 2

Front Panel Assembly Replacement: 步骤 2 中的图像 1，1

Remove the button cover by lifting the cover away from the tablet.

步骤 3

Front Panel Assembly Replacement: 步骤 3 中的图像 1，1

Using the Torx screwdriver, remove the 4mm screws.

步骤 4

Front Panel Assembly Replacement: 步骤 4 中的图像 1，1

With the Torx screwdriver, remove the two 5mm screws.

步骤 5

Front Panel Assembly Replacement: 步骤 5 中的图像 1，2

Front Panel Assembly Replacement: 步骤 5 中的图像 2，2

Using the spudger, insert it under the black side panel. Slide the spudger all the way around until the cover piece comes off.
With the Torx screwdriver, remove the two 4mm screws.

步骤 6

Front Panel Assembly Replacement: 步骤 6 中的图像 1，1

Use the spudger to go along the edges of the device and pop out the latches securing the display to the case.

步骤 7

Front Panel Assembly Replacement: 步骤 7 中的图像 1，2

Front Panel Assembly Replacement: 步骤 7 中的图像 2，2

Ribbon cables are very sensitive and prone to breaking
Disconnect the ribbon cables by unlocking the connector and pulling the cable out slowly.
Make sure all the cables are unplugged before opening the device completely. Failure to do so might lead to broken or torn cables.

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

作者

与2其他贡献者

Carlos Salas

于09/30/16注册

188 声望

撰写一个指南

+ 7更多徽章

团队

USF Tampa, Team 4-6, Passmore Fall 2016 USF Tampa, Team 4-6, Passmore Fall 2016 的会员

USFT-PASSMORE-F16S4G6

3 名成员

创作了12篇指南

0条评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 2

总计 57