修复你的物品 社区 商店

Fairphone 4 Screen Replacement

简介

Use this guide to replace a broken or defective screen on your Fairphone 4.

你所需要的

  1. Fairphone 4 Screen Replacement, Pry the back cover up: 步骤 1 中的图像 1，2 Fairphone 4 Screen Replacement, Pry the back cover up: 步骤 1 中的图像 2，2

    • Be sure to power off your phone before you begin.

    • Insert your thumbnail, or a prying tool like a spudger, into the notch at the bottom right of the back cover.

    • Pry the back cover up to start separating its plastic clips.

    编辑

  2. Fairphone 4 Screen Replacement: 步骤 2 中的图像 1，3 Fairphone 4 Screen Replacement: 步骤 2 中的图像 2，3 Fairphone 4 Screen Replacement: 步骤 2 中的图像 3，3

    • Using your thumbnail or an opening pick, slide along the right side of the phone to loosen the plastic clips.

    编辑

  3. Fairphone 4 Screen Replacement: 步骤 3 中的图像 1，3 Fairphone 4 Screen Replacement: 步骤 3 中的图像 2，3 Fairphone 4 Screen Replacement: 步骤 3 中的图像 3，3

    • Slide along the bottom of the phone to loosen the plastic clips.

    编辑

  4. Fairphone 4 Screen Replacement: 步骤 4 中的图像 1，3 Fairphone 4 Screen Replacement: 步骤 4 中的图像 2，3 Fairphone 4 Screen Replacement: 步骤 4 中的图像 3，3

    • Slide along the left side of the phone to loosen the plastic clips.

    • Lift the back cover to release the rest of the plastic clips and remove it.

    • To reinstall the back cover press it firmly into place until you hear a snap from the plastic clips.

    编辑

  6. Fairphone 4 Screen Replacement, Lever up the Battery: 步骤 5 中的图像 1，3 Fairphone 4 Screen Replacement, Lever up the Battery: 步骤 5 中的图像 2，3 Fairphone 4 Screen Replacement, Lever up the Battery: 步骤 5 中的图像 3，3

    • Use a fingernail or a prying tool at the marked notch to lever the battery out of its recess.

    • Lift the battery out of its recess and remove it.

    • Remove the battery.

    编辑

  7. Fairphone 4 Screen Replacement, Unscrew the display: 步骤 6 中的图像 1，1

    • Remove the eight 4.8 mm-long Phillips screws.

    编辑

  8. Fairphone 4 Screen Replacement, Create a gap: 步骤 7 中的图像 1，3 Fairphone 4 Screen Replacement, Create a gap: 步骤 7 中的图像 2，3 Fairphone 4 Screen Replacement, Create a gap: 步骤 7 中的图像 3，3

    • Flip the phone over so the screen faces up

    • Insert an opening pick between the screen and the frame.

    编辑

  9. Fairphone 4 Screen Replacement, Slide along the edge: 步骤 8 中的图像 1，2 Fairphone 4 Screen Replacement, Slide along the edge: 步骤 8 中的图像 2，2

    • Slide the opening pick along the edge to the top right corner.

    编辑

  10. Fairphone 4 Screen Replacement: 步骤 9 中的图像 1，2 Fairphone 4 Screen Replacement: 步骤 9 中的图像 2，2

    • Continue to slide the opening pick along the top of the phone.

    编辑

  11. Fairphone 4 Screen Replacement: 步骤 10 中的图像 1，3 Fairphone 4 Screen Replacement: 步骤 10 中的图像 2，3 Fairphone 4 Screen Replacement: 步骤 10 中的图像 3，3

    • Slide the opening pick along the left side to the bottom left corner.

    编辑

  12. Fairphone 4 Screen Replacement, Flip the screen over: 步骤 11 中的图像 1，3 Fairphone 4 Screen Replacement, Flip the screen over: 步骤 11 中的图像 2，3 Fairphone 4 Screen Replacement, Flip the screen over: 步骤 11 中的图像 3，3

    • Do not remove the screen yet. It's still connected to the phone with a connection cable.

    • Grab the screen and lift it straight up just enough to clear its pegs from the frame.

    • Rotate the display carefully clock-wise and flip it over to get access to the connector.

    • Place the display on the device with the screen facing downwards.

    编辑

  13. Fairphone 4 Screen Replacement, Disconnect the cable: 步骤 12 中的图像 1，2 Fairphone 4 Screen Replacement, Disconnect the cable: 步骤 12 中的图像 2，2

    • Use an opening pick to pry up and disconnect the display connection cable.

    • Remove the screen.

    • Compare your new replacement screen to the original part—you may need to remove a front camera dust cover before you install it.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

Take your e-waste to an R2 or e-Stewards certified recycler.

Repair didn’t go as planned? Try some basic troubleshooting, or ask our Answers community for help.

10等其他人完成本指南。

作者

与2其他贡献者

Manuel Haeussermann

于07/13/22注册

15,487 声望

创作了71篇指南

徽章: 30

+ 27更多徽章

团队

iFixit iFixit 的会员

Staff

135 名成员

创作了16,817篇指南

8条评论

20-40 Minutes? ... more like 10 ... and I wasn't even pushing it

Patrick Küster - 回复

Thanks for your comment! The time estimate was set a little too high, you're right. I've adjusted it!

Manuel Haeussermann -

Vielen Dank für die präzise Anleitung. Auf alle heiklen Punkte wurde hingewiesen. Habe es locker geschafft und war danach ganz stolz!

Johanna - 回复

I can confirm that you need a #0 screwdriver, not a #00, as has been changed in the latest unchecked version.

Jonathan - 回复

Hi Jonathan, thanks for you comment! While a #0 screwdriver will work, we recommend a #00 as Fairphone themselves do, see their website: "The only tool you will need is a Phillips #00 screwdriver to access all spare parts of the Fairphone 4."

Manuel Haeussermann -

添加评论

浏览统计数据:

过去 24 小时： 14

过去 7 天： 131

过去 30 天： 419

总计 10,759