修复你的物品 社区 商店

Eton Soulra XL Woofer Wire Repair

简介

The Eton Soulra XL has two woofers that are relatively easy to access and reconnect, should one become disconnected. This guide will provide step-by-step instructions to disassemble, clean, and repair loose connections. You will need to know how to solder; review 如何焊接和拆焊 if you are unfamiliar with the process.

你所需要的

  1. Eton Soulra XL Woofer Wire Repair, Eton Soulra XL Woofer Wire Repair: 步骤 1 中的图像 1，1

    • Gently pull down and out on the front cover; it should come off easily.

    • This step is not necessary; if the cover does not come off easily it can be left on.

    编辑

  2. Eton Soulra XL Woofer Wire Repair: 步骤 2 中的图像 1，1

    • Remove two screws from each side using a H2.5 hexagonal screwdriver.

    编辑

  3. Eton Soulra XL Woofer Wire Repair: 步骤 3 中的图像 1，1

    • Pry off "Eton" logo from the side speaker covers using a pry tool.

    • Be careful not to break the emblem when removing.

    编辑

  4. Eton Soulra XL Woofer Wire Repair: 步骤 4 中的图像 1，1

    • Remove the two screws that were covered by the "Eton" logo using a PH0 screwdriver.

    编辑

  5. Eton Soulra XL Woofer Wire Repair: 步骤 5 中的图像 1，1

    • The side speaker covers should come off easily now; remove them.

    编辑

  7. Eton Soulra XL Woofer Wire Repair: 步骤 6 中的图像 1，1

    • Remove the five screws on the underside of the device using a PH0 screwdriver.

    编辑

  8. Eton Soulra XL Woofer Wire Repair: 步骤 7 中的图像 1，1

    • Extend the solar panel into the upright position to access the screws on the backside of the device.

    编辑

  9. Eton Soulra XL Woofer Wire Repair: 步骤 8 中的图像 1，1

    • Remove the three screws at the top of the back panel using H2.5 hexagonal screwdriver.

    编辑

  10. Eton Soulra XL Woofer Wire Repair: 步骤 9 中的图像 1，1

    • Remove the ten screws on the backside of the device using a long-neck PH0 screwdriver.

    • Some of the screws are deep within the panel and require an appropriate (long neck PH0) screwdriver to access them.

    编辑

  11. Eton Soulra XL Woofer Wire Repair: 步骤 10 中的图像 1，1

    • At this point, the back panel of the device should lift off easily. Lift it off and set aside.

    编辑

  12. Eton Soulra XL Woofer Wire Repair: 步骤 11 中的图像 1，1

    • Use compressed air to clear away any dust or debris.

    编辑

  13. Eton Soulra XL Woofer Wire Repair: 步骤 12 中的图像 1，1

    • Inspect wires and locate any speaker loose connections.

    编辑

  14. Eton Soulra XL Woofer Wire Repair: 步骤 13 中的图像 1，1

    • Solder loose wires back into place.

    • Use the methods outlined in the ifixit soldering guide (link in the introduction).

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

作者

与2其他贡献者

Nate Kilmer

于02/10/16注册

128 声望

撰写一个指南

徽章: 6

+ 3更多徽章

团队

Colorado Springs, Team 5-6, Mcmichael Spring 2016 Colorado Springs, Team 5-6, Mcmichael Spring 2016 的会员

UCCS-MCMICHAEL-S16S5G6

3 名成员

创作了1篇指南

一条评论

Awesome instruction. I have this model and the 30 pin dock stopped working. Any chance that you might have instruction to get to the dock and check ribbon? From looking at Bose dock videos, this is a common problem. Namaste, Nathan in Canada.

renaldo71 - 回复

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 2

过去 30 天： 11

总计 338