DualSense Controller v2 L1 and R1 Button Replacement - iFixit 维修指南

简介

Follow this guide to replace the L1 and/or R1 buttons on your Sony DualSense controller.

Note: This guide is for current DualSense controllers with FCC IDs that end with A. Check the back of your controller to verify your model. If yours ends in a 1, it is an early model and there will be internal differences. Follow these guides for the earlier version.

你所需要的

步骤 1 Remove the L1 button

DualSense Controller v2 L1 and R1 Button Replacement, Remove the L1 button: 步骤 1 中的图像 1，3

DualSense Controller v2 L1 and R1 Button Replacement, Remove the L1 button: 步骤 1 中的图像 2，3

DualSense Controller v2 L1 and R1 Button Replacement, Remove the L1 button: 步骤 1 中的图像 3，3

Insert the flat end of your spudger into the gap above the L1 button.
Cover the button with your thumb to prevent it from ejecting across the room.
Pry the spudger upward to remove the L1 button.

步骤 2 Remove the R1 button

DualSense Controller v2 L1 and R1 Button Replacement, Remove the R1 button: 步骤 2 中的图像 1，3

DualSense Controller v2 L1 and R1 Button Replacement, Remove the R1 button: 步骤 2 中的图像 2，3

DualSense Controller v2 L1 and R1 Button Replacement, Remove the R1 button: 步骤 2 中的图像 3，3

Insert the flat end of your spudger into the gap above the R1 button.
Cover the button with your thumb to prevent it from ejecting across the room.
Pry the spudger upward to remove the R1 button.

结论

To reassemble your device, follow these instructions in reverse order.

Take your e-waste to an R2 or e-Stewards certified recycler.

Repair didn’t go as planned? Try some basic troubleshooting, or ask our Answers community for help.

2等其他人完成本指南。

作者

与1其他贡献者

Sam Omiotek

于02/25/19注册

73,429 声望

创作了288篇指南

+ 32更多徽章

0条评论

浏览统计数据:

过去 24 小时： 2

过去 7 天： 19

过去 30 天： 112

总计 1,075