Disassembling Soundmates V2 Case - iFixit 维修指南

简介

My earbuds got run over a while ago, so let's take the case apart too! I'm hoping I can reuse the circuitry for another project

你所需要的

步骤 1 Soundmates V2 Case

Disassembling Soundmates V2 Case, Soundmates V2 Case: 步骤 1 中的图像 1，2

Disassembling Soundmates V2 Case, Soundmates V2 Case: 步骤 1 中的图像 2，2

Flip open the cover and insert a thin flathead screwdriver in the seam by the hinge
Rotate the screwdriver just enough to create a gap between the two halves of the case
If this doesn't work very well, try the other side
Insert a spudger or another flathead bit into the new gap
This may cause some cosmetic damage

步骤 2

Disassembling Soundmates V2 Case: 步骤 2 中的图像 1，3

Disassembling Soundmates V2 Case: 步骤 2 中的图像 2，3

Disassembling Soundmates V2 Case: 步骤 2 中的图像 3，3

Once you've created a small gap, the lid should come off fairly easily
Run the spudger around the case until the two halves separate
If the top half doesn't come straight up and out, it may break off the charging port, like it did with mine. Go slowly and use caution

步骤 3

Disassembling Soundmates V2 Case: 步骤 3 中的图像 1，1

Remove the two Philips #00 screws securing the board

步骤 4

Disassembling Soundmates V2 Case: 步骤 4 中的图像 1，1

Gently lift the circuitboard off. Not too high; it's still wired to the battery
Now just pull off the battery; it's only held down by a sticky foam pad

步骤 5

Disassembling Soundmates V2 Case: 步骤 5 中的图像 1，1

Done! Hope you didn't break anything like I did.

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

作者

与1其他贡献者

darth mango

于03/13/23注册

3,032 声望

创作了3篇指南

+ 27更多徽章

团队

Kid fixers Kid fixers 的会员

Community

183 名成员

创作了256篇指南

0条评论

浏览统计数据:

过去 24 小时： 2

过去 7 天： 7

过去 30 天： 18

总计 502