修复你的物品 社区 商店

DigiTech RP70 DC Power Connector Replacement

简介

If the DC power connector is broken this guide will teach you how to remove the broken component for replacement.

你所需要的

  1. DigiTech RP70 DC Power Connector Replacement, Motherboard: 步骤 1 中的图像 1，2 DigiTech RP70 DC Power Connector Replacement, Motherboard: 步骤 1 中的图像 2，2

    • Unplug the device from its AC power adapter; unplug anything connected to the input/output jacks.

    • Remove the four 8mm Phillips #0 screws located on the back panel.

    编辑

  2. DigiTech RP70 DC Power Connector Replacement: 步骤 2 中的图像 1，2 DigiTech RP70 DC Power Connector Replacement: 步骤 2 中的图像 2，2

    • Remove the back panel to expose the motherboard.

    编辑

  4. DigiTech RP70 DC Power Connector Replacement: 步骤 3 中的图像 1，1

    • Remove the two 11mm #0 Phillips screws located at the bottom of the motherboard.

    编辑

  5. DigiTech RP70 DC Power Connector Replacement: 步骤 4 中的图像 1，1

    • Lift the indented end of the motherboard opposite the input/output jacks. Then, pull away from the input/output jacks to slide the motherboard out of the casing.

    编辑

  6. DigiTech RP70 DC Power Connector Replacement, DC Power Connector: 步骤 5 中的图像 1，1

    • Desolder the back of the motherboard where the power connector is located.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

一条评论

Later? I cant see to other

ISAAC SALAZAR - 回复

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 4

过去 30 天： 14

总计 327