修复你的物品 社区 商店

Creative Zen V Plus Headphone Jack Replacement

简介

Before replacing the headphone jack, see the troubleshooting section for the Creative Zen V Plus. You'll also need to know how to desolder and solder components so be sure to learn how with 如何焊接和拆焊!

你所需要的

  1. Creative Zen V Plus Headphone Jack Replacement, Prerequisite Only: 步骤 1 中的图像 1，1

    • Find the grooves around the buttons on the front and carefully remove the panel. This can be done without the use of any tools.

    编辑

  2. Creative Zen V Plus Headphone Jack Replacement: 步骤 2 中的图像 1，1

    • Using a plastic opening tool, place the skinny flat end between the groove running along side of the device.

    • Using a twisting motion, detach the control panel from the device

    编辑

  3. Creative Zen V Plus Headphone Jack Replacement: 步骤 3 中的图像 1，1

    • Find the groove around the outside of the green section. Use an ESD safe spudger to slowly lift the plastic panel up.

    编辑

  5. Creative Zen V Plus Headphone Jack Replacement: 步骤 4 中的图像 1，2 Creative Zen V Plus Headphone Jack Replacement: 步骤 4 中的图像 2，2

    • After removing the green section, find the groove around the display. Insert a ESD safe spudger and carefully lift the display.

    编辑

  6. Creative Zen V Plus Headphone Jack Replacement: 步骤 5 中的图像 1，1

    • The display can lift up the display but be sure not to damage any of the cables connecting it to the mother board.

    • Remove the screw located under the display using the 00 Phillips head screwdriver.

    编辑

  7. Creative Zen V Plus Headphone Jack Replacement: 步骤 6 中的图像 1，3 Creative Zen V Plus Headphone Jack Replacement: 步骤 6 中的图像 2，3 Creative Zen V Plus Headphone Jack Replacement: 步骤 6 中的图像 3，3

    • Pull up on the motherboard and display. It is glued to the base so it will require a little force. Be careful though, as the board is fragile.

    编辑

  8. Creative Zen V Plus Headphone Jack Replacement, Headphone Jack: 步骤 7 中的图像 1，1

    • Locate the circles of metal holding the headphone jack to the logic board. Using a soldering iron, de-solder these circles and remove the headphone jack.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

作者

与1其他贡献者

Joshua Meines

于10/19/16注册

316 声望

创作了3篇指南

徽章: 7

+ 4更多徽章

团队

IUPUI, Team 2-5, Baechle Fall 2016 IUPUI, Team 2-5, Baechle Fall 2016 的会员

IUPUI-BAECHLE-F16S2G5

4 名成员

创作了7篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 1

过去 7 天： 1

过去 30 天： 6

总计 286