跳转到主内容

简介

Replacing the speakers is a difficult task. It will required you to disassemble both sides of the headphones and require soldering skills. You will need to have a soldering kit to do this replacement. Replacing the speakers can be difficult without prior mechanical experience, so make sure you give yourself the necessary time to complete this replacement.

  1. Carefully remove earmuff from headphones by getting a grip under the earmuff cushion and peeling up over the lip that keeps it in place.
    • Carefully remove earmuff from headphones by getting a grip under the earmuff cushion and peeling up over the lip that keeps it in place.

  2. Using the Phillips #0 screwdriver, unscrew the seven 6.4 mm screws holding the black speaker cover in place. If you are disassembling the lefthand earfmuff, there will be eight 6.4 mm screws to remove.
    • Using the Phillips #0 screwdriver, unscrew the seven 6.4 mm screws holding the black speaker cover in place.

    • If you are disassembling the lefthand earfmuff, there will be eight 6.4 mm screws to remove.

  3. Skip the upgrade.

    Take $10 off $50 with
    SKIPANDSAVE10

    Save Now

    Skip the upgrade.

    Take $10 off $50 with
    SKIPANDSAVE10

    Save Now
  4. Remove and set aside the black panel, taking care to keep the wires attached. The panel should lift up without much force. If the panel does not budge, carefully use the  iFixit plastic opening tool to dislodge the piece.
    • Remove and set aside the black panel, taking care to keep the wires attached.

    • The panel should lift up without much force. If the panel does not budge, carefully use the iFixit plastic opening tool to dislodge the piece.

  5. Desolder the wire that connects to the speaker.
    • Desolder the wire that connects to the speaker.

    • For steps on how to solder, see this helpful guide.

  6. Use a knife tool as a wedge to remove the speaker and glue in the new speaker. Use a knife tool as a wedge to remove the speaker and glue in the new speaker.
    • Use a knife tool as a wedge to remove the speaker and glue in the new speaker.

结论

To reassemble your device, follow these instructions in reverse order.

Gianna Nobili

于2019年04月15日注册

617 信誉积分

创作了5篇指南

团队

Cal Poly, Team S9-G13, Maness Spring 2019 Cal Poly, Team S9-G13, Maness Spring 2019 的会员

CPSU-MANESS-S19S9G13

5 名成员

创作了6篇指南

添加评论

浏览统计数据:

过去的24小时: 1

过去的7天: 7

过去的30天: 27

总计 155