跳转到主内容

修复你的物品

维修的权力

配件 & 工具

简介

The purpose of this guide is to communicate steps on how to replace or repair the cartridge reader on a ColecoVision.

  1. Flip the console upside down and remove the eight 15mm Phillips #1 screws.
    • Flip the console upside down and remove the eight 15mm Phillips #1 screws.

  2. Use the metal spudger along the bottom rim of the front panel to safely remove the top of the console. Set aside the top. Use the metal spudger along the bottom rim of the front panel to safely remove the top of the console. Set aside the top.
    • Use the metal spudger along the bottom rim of the front panel to safely remove the top of the console. Set aside the top.

  3. 任天堂 Switch 套装

    A quick fix to get back in the game

    Shop Switch Kits

    任天堂 Switch 套装

    A quick fix to get back in the game

    Shop Switch Kits
  4. Remove the two 15mm Phillips #1 screws holding the casing in place. Remove the casing to reveal the cartridge reader.
    • Remove the two 15mm Phillips #1 screws holding the casing in place.

    • Remove the casing to reveal the cartridge reader.

  5. Desolder the sides of the cartridge reader using the soldering iron and desolder pump. Refer to this soldering technique guide for reference Patiently wait for the cartridge reader to cool down after being desoldered.
    • Desolder the sides of the cartridge reader using the soldering iron and desolder pump.

    • Refer to this soldering technique guide for reference

    • Patiently wait for the cartridge reader to cool down after being desoldered.

    • It's very important to remove all the tin from the motherboard and cartridge reader before lifting it from the motherboard. Failure to do so could damage the motherboard.

    • Carefully lift up the cartridge reader. A plastic spudger might be helpful in order to easily remove the cartridge reader.

结论

To reassemble your device, follow these instructions in reverse order.

Anastazia Kidder

于2018年10月17日注册

109 信誉积分

撰写一个指南

团队

UW Tacoma, Team S1-G2, Rose Fall 2018 UW Tacoma, Team S1-G2, Rose Fall 2018 的会员

UWT-ROSE-F18S1G2

4 名成员

创作了11篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 3

过去的30天: 15

总计 325