简介

Swapping out the presser foot lets you create different stitches for different sewing tasks, such as buttonholes, zippers, zigzag, etc. Use this guide to change the presser foot in your sewing machine. We’re using a Bernina 830 for this procedure; sewing machines can vary, so check your sewing machine's owner’s manual for specific instructions.

工具

无需工具。

配件

  1. Set the sewing machine needle to the upright position by turning the balance wheel towards you.
    • Set the sewing machine needle to the upright position by turning the balance wheel towards you.

    • Release the presser foot lever by sliding it up.

    • The presser foot will just fall out. Be ready to grab it.

    添加评论

  2. Pull the presser foot down and slide it off the peg on the machine.
    • Pull the presser foot down and slide it off the peg on the machine.

    • Be careful not to break the needle.

    添加评论

  3. 传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Grab your desired presser foot, and orient it foot-down.

    • Take the foot at an angle and slide the hole in the top of the presser foot onto the peg on the sewing machine.

    添加评论

    • Slide the presser foot lever down to lock the new foot in place.

    • Be sure to check your manual to see if you need to adjust the needle position. If it's not correctly adjusted, you may hit the needle on the presser foot and break the needle while sewing.

    添加评论

终点

另外一个人完成了本指南。

Brittany McCrigler

于2012年03月05日注册

80,076 信誉积分

创作了132篇指南

团队

iFixit iFixit 的会员

Community

113 名成员

创作了7,343篇指南

添加评论

浏览统计数据:

过去的24小时: 25

过去的7天: 105

过去的30天: 497

总计 15,234