跳转到主内容

简介

This guide will walk you through the steps of how to get to the speaker component of the keyboard in order to properly replace it.

  1. Place device face-down. Remove seventeen 16 mm screws with a Phillips #2 screwdriver. Flip keyboard around so the keys are facing up.
    • Place device face-down.

    • Remove seventeen 16 mm screws with a Phillips #2 screwdriver.

    • Flip keyboard around so the keys are facing up.

  2. Pull the black panel away from the keyboard. Pull the black panel away from the keyboard.
    • Pull the black panel away from the keyboard.

  3. Remove two 16 mm screws with a Phillips #2 screwdriver. Pop the wires out of the plastic holders with a finger. Pop the wires out of the plastic holders with a finger.
    • Remove two 16 mm screws with a Phillips #2 screwdriver.

    • Pop the wires out of the plastic holders with a finger.

  4. Turn the speaker around and place on the keyboard keys. Remove four 16 mm screws with a Phillips #2 screwdriver.
    • Turn the speaker around and place on the keyboard keys.

    • Remove four 16 mm screws with a Phillips #2 screwdriver.

  5. De-solder speaker wires at indicated points. Follow the How to Solder and Desolder Connections guide for soldering help.
结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

Alexa

于2017年01月24日注册

651 信誉积分

创作了6篇指南

团队

Cal Poly, Team 10-2, Banghart Winter 2017 Cal Poly, Team 10-2, Banghart Winter 2017 的会员

CPSU-BANGHART-W17S10G2

4 名成员

创作了6篇指南

一条评论

This is all it takes, a simple repair to make!

Brian Roach - 回复

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 3

过去的30天: 22

总计 1,369