菜单

你的设置

我的工作台

快速访问设备的指南，配件和论坛
我的购物车

购物车是空的

浏览我们的商店

Canon Powershot A610 Speaker Replacement

撰写者： Matthew Ramirez (和另外4个贡献者)
  • 评论： 0
  • 收藏 0

难度

困难

步骤

10

所需时间

15 - 20 分钟

节

1

标志

2

Grammar Police

语法警察

发挥你内在的英语语法能力，帮助提高本指南语法准确性！

Missing Prerequisites

缺少前提条件

本指南缺少关于如何开始这些步骤的信息。请编写前提指南！

简介

The speaker is on the underside of the top casing and will involve some minor technical skills.

工具

购买这些工具

配件

没有特定配件。

  1. Locate and remove the three screws attaching the side panel. Remove the side paneling and the two remaining screws attached to the frame of the camera. Remove the side paneling and the two remaining screws attached to the frame of the camera.

    • Locate and remove the three screws attaching the side panel.

    • Remove the side paneling and the two remaining screws attached to the frame of the camera.

    翻译

  2. Remove the two screws on the bottom panel of the camera.

    • Remove the two screws on the bottom panel of the camera.

    翻译

  3. Open the battery cover.

    • Open the battery cover.

    • Locate and remove the four screws inside.

    • One screw is located on the top side of the bottom cover. The remaining three screws are located at the bottom of the battery compartment.

    • Close the battery cover.

    翻译

  4. Open the "DIGITAL AV OUT" door on the camera. Remove the three screws. The door can be removed from the camera.

    • Open the "DIGITAL AV OUT" door on the camera.

    • Remove the three screws. The door can be removed from the camera.

    翻译

  5. iPhone 电池维修工具包

    只要 $29.99

    Buy Now

    iPhone 电池维修工具包

    只要 $29.99

    Buy Now

  6. Gripping the sides of the top cover, gently pull apart the top cover from the camera.

    • Gripping the sides of the top cover, gently pull apart the top cover from the camera.

    • The top cover does not completely detach.

    翻译

  7. Open the battery cover. Gently pull apart the front cover from the camera.

    • Open the battery cover.

    • Gently pull apart the front cover from the camera.

    • This may require some force. Be careful not to break the plastic.

    翻译

  8. Using a thin tool, push the black attachment away from the white connection piece to detach the connector ribbon. Using a thin tool, push the black attachment away from the white connection piece to detach the connector ribbon.

    • Using a thin tool, push the black attachment away from the white connection piece to detach the connector ribbon.

    翻译

  9. Remove the 3mm screw holding the metal frame.

    • Remove the 3mm screw holding the metal frame.

    翻译

  10. Use an unfolded paper clip to push the speaker from the top of the casing out towards the bottom. You may need to use a bit of force as the speaker be glued in to the top casing.

    • Use an unfolded paper clip to push the speaker from the top of the casing out towards the bottom.

    • You may need to use a bit of force as the speaker be glued in to the top casing.

    • There is a soft fabric speaker cover separating the speaker from the casing. Make sure not to remove it from its position in the housing.

    翻译

  11. Unsolder the speaker at two points and reattach the new speaker.

    • Unsolder the speaker at two points and reattach the new speaker.

    翻译
结论

To reassemble your device, follow these instructions in reverse order.

作者

与4其他贡献者

Matthew Ramirez

于2011年01月20日注册

620 信誉积分

创作了5篇指南

徽章: 10

+ 7更多徽章

团队

Cal Poly, Team 11-26, Maness Winter 2011 Cal Poly, Team 11-26, Maness Winter 2011 的会员

CPSU-MANESS-W11S11G26

3 名成员

创作了5篇指南

0条评论

添加一条评论

添加评论

浏览统计数据:

过去的24小时： 1

过去的7天： 1

过去的30天： 2

总计 2,668