Beyerdynamic MMX100 Volume Controller Repair

简介

This guide will illustrate how to desolder the rotary encoder responsible for the volume control on the Beyerdynamic MMX100 headset. If you're experiencing issues with your headset's volume, follow the steps outlined here to successfully complete the soldering process. Ensure you have some soldering experience, exercise caution to avoid potential risks, and use anti-static measures during the repair.

你所需要的

步骤 1 Beyerdynamic MMX100 Volume Controller Repair

Beyerdynamic MMX100 Volume Controller Repair, Beyerdynamic MMX100 Volume Controller Repair: 步骤 1 中的图像 1，3

Beyerdynamic MMX100 Volume Controller Repair, Beyerdynamic MMX100 Volume Controller Repair: 步骤 1 中的图像 2，3

Beyerdynamic MMX100 Volume Controller Repair, Beyerdynamic MMX100 Volume Controller Repair: 步骤 1 中的图像 3，3

Twist the left speaker cushion towards you, and pull off the headset.

编辑

步骤 2

Beyerdynamic MMX100 Volume Controller Repair: 步骤 2 中的图像 3，3

Using the 2.0mm Phillips-Head screwdriver, unscrew the two 0.6mm screws at the end of the left side headband.

编辑

步骤 3

Hold open the top part of the headband. Slide out the left earphone.

编辑

步骤 4

Beyerdynamic MMX100 Volume Controller Repair: 步骤 4 中的图像 3，3

Using the 3.0mm Phillips-Head Screwdriver, unscrew the three 0.7 mm screws on the left speaker cover.

编辑

步骤 5

Using the 2.0mm Phillips-Head Screwdriver, unscrew the two 0.5mm screws on the volume control component.

编辑

步骤 6

Beyerdynamic MMX100 Volume Controller Repair: 步骤 6 中的图像 3，3

Take out, and flip over, the volume control component.

编辑

步骤 7

Using the 2.0mm Phillips-Head Screwdriver, unscrew the two 0.3mm screws on the board. Then, take off the volume wheel.

编辑

步骤 8

Hazardous situation which, if not avoided, could result in minor or moderate injury.
Using a soldering iron, desolder the damaged wires and the prongs on either side of the board.