修复你的物品 社区 商店

Beiens Cartoon RC Race Car LED Light Replacement

简介

This guide requires you to use a soldering iron that can be dangerous if you do not know how to use it. I suggest looking at iFixit's Soldering Guide.

你所需要的

  1. Beiens Cartoon RC Race Car LED Light Replacement, LED Light: 步骤 1 中的图像 1，1

    • Hold the remote control with the backside facing you and, using the Phillips #00 screwdriver, unscrew the six 6.5 mm screws on the back of the controller that hold it together.

    编辑

  2. Beiens Cartoon RC Race Car LED Light Replacement: 步骤 2 中的图像 1，1

    • Open the remote control.

    编辑

  4. Beiens Cartoon RC Race Car LED Light Replacement: 步骤 3 中的图像 1，1

    • Lift the motherboard to separate it from the remote control.

    编辑

  5. Beiens Cartoon RC Race Car LED Light Replacement: 步骤 4 中的图像 1，1

    • To remove the light, use a soldering iron to heat the solder to a liquid and loosen the leads.

    • While the solder is liquid, lightly pull on the LED to remove it from the motherboard.

    • The soldering iron will get very hot while it's in use. Be sure to place it on top of a heat protected surface and be careful not to touch the operational end.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

作者

与2其他贡献者

Amber Ashley

于10/01/15注册

329 声望

创作了4篇指南

徽章: 8

+ 5更多徽章

团队

USF Tampa, Team 1-6, Leahy Fall 2015 USF Tampa, Team 1-6, Leahy Fall 2015 的会员

USFT-LEAHY-F15S1G6

3 名成员

创作了8篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 0

总计 260