Beboncool Gamepad for Nintendo Switch Battery Replacement

简介

Rechargeable batteries only have so many cycles of charge and discharge. When the battery is no longer able to be recharged this does not mean that the the controller itself is bad, it simply means that a new, fresh battery is needed. This guide is written to help you replace the factory installed battery with a new one to continue to use your controller without having to buy a complete new one.

你所需要的

步骤 1 Beboncool Nintendo Switch Gamepad Disassembly

Beboncool Gamepad for Nintendo Switch Battery Replacement, Beboncool Nintendo Switch Gamepad Disassembly: 步骤 1 中的图像 1，3

Beboncool Gamepad for Nintendo Switch Battery Replacement, Beboncool Nintendo Switch Gamepad Disassembly: 步骤 1 中的图像 2，3

Beboncool Gamepad for Nintendo Switch Battery Replacement, Beboncool Nintendo Switch Gamepad Disassembly: 步骤 1 中的图像 3，3

Use the plastic opening tool to remove the blue plastic grips from the sides of the controller.

编辑

步骤 2

Use the Phillips #0 screwdriver to remove the seven 5mm screws from the back of the controller.

编辑

步骤 3

Beboncool Gamepad for Nintendo Switch Battery Replacement: 步骤 3 中的图像 3，3

Gently separate the two halves of the controller.
As the two covers come apart the L1 and R1 button, will fall free from the controller. Be sure not to lose them if they should pop out and fall.
Be sure to slide the small circuit boards out of the covers to be able to separate the two halves

编辑

步骤 4

Use the Phillips #0 screwdriver to remove the two 3.5mm screws holding the circuit board in place.

编辑

步骤 5

Beboncool Gamepad for Nintendo Switch Battery Replacement: 步骤 5 中的图像 3，3

Lift the motherboard from the back case with the vibration motors and button boards attached.

编辑

步骤 6 Battery

Beboncool Gamepad for Nintendo Switch Battery Replacement, Battery: 步骤 6 中的图像 1，3

Beboncool Gamepad for Nintendo Switch Battery Replacement, Battery: 步骤 6 中的图像 2，3

Beboncool Gamepad for Nintendo Switch Battery Replacement, Battery: 步骤 6 中的图像 3，3

Carefully separate the battery which is adhered to the circuit board.

编辑

步骤 7

Beboncool Gamepad for Nintendo Switch Battery Replacement: 步骤 7 中的图像 3，3

Remove the battery by melting the solder to disconnect the battery leads.
For help with soldering best practices, check out this How to Solder and Desolder Components Guide.