跳转到主内容

Basis B1 Band LED Screen Replacement

你所需要的

  1. Basis B1 Band LED Screen Replacement, Watch Strap: 步骤 1 中的图像 1,1
    • Wedge a plastic opening tool between band contacts.

  2. Basis B1 Band LED Screen Replacement: 步骤 2 中的图像 1,1
    • Push in plastic opening tool until the components click and pop out of the holder.

    • Repeat steps for other band.

  3. Basis B1 Band LED Screen Replacement, Back Plate: 步骤 3 中的图像 1,1
    • Remove four 4mm screws using a PH000 screwdriver.

    • Remove back plate.

  4. Basis B1 Band LED Screen Replacement, Battery: 步骤 4 中的图像 1,1
    • Use tweezers to remove elastomeric, or zebra, connector.

  5. Basis B1 Band LED Screen Replacement: 步骤 5 中的图像 1,2 Basis B1 Band LED Screen Replacement: 步骤 5 中的图像 2,2
    • Use the flat end of the spudger to carefully lift the battery until adhesive seal is broken.

  6. Basis B1 Band LED Screen Replacement: 步骤 6 中的图像 1,1
    • Use the pointy edge of the spudger tool to detach battery leads from the circuit board.

  7. Basis B1 Band LED Screen Replacement, LED Screen: 步骤 7 中的图像 1,2 Basis B1 Band LED Screen Replacement, LED Screen: 步骤 7 中的图像 2,2
    • Use PH000 screw driver to remove two 6mm bracketed screws.

    • Remove bracket.

  8. Basis B1 Band LED Screen Replacement: 步骤 8 中的图像 1,1
    • Use PH000 tool to remove two 4mm screws.

  9. Basis B1 Band LED Screen Replacement: 步骤 9 中的图像 1,1
  10. Basis B1 Band LED Screen Replacement: 步骤 10 中的图像 1,1
    • Use spudger tool to lift the clasp of LED connector strip and remove from watch case.

  11. Basis B1 Band LED Screen Replacement: 步骤 11 中的图像 1,1
    • Use spudger tool to remove the LED screen from the watch case.

结论

To reassemble your device, follow these instructions in reverse order.

Kaitlyn Lee

于11/06/17注册

518 声望

创作了4篇指南

团队

IUPUI, Team S6-G1, Baechle Fall 2017 IUPUI, Team S6-G1, Baechle Fall 2017 的会员

IUPUI-BAECHLE-F17S6G1

4 名成员

创作了4篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 0

过去 30 天: 0

总计 200