修复你的物品 社区 商店

Autosampler Battery Replacement & Voltage Check (For Old & New Versions)

你所需要的

  1. Autosampler Battery Replacement & Voltage Check (For Old & New Versions), Disconnect the batteries completely: 步骤 1 中的图像 1，3 Autosampler Battery Replacement & Voltage Check (For Old & New Versions), Disconnect the batteries completely: 步骤 1 中的图像 2，3 Autosampler Battery Replacement & Voltage Check (For Old & New Versions), Disconnect the batteries completely: 步骤 1 中的图像 3，3

    • 1. Disconnect the plug to the solar panel (yellow circle).

    • Then, grabbing the green connector and pull the battery connector from the solar charge controller (blue arrow).

    • This will be done inside the node. It was removed from the node to make it easier to see for the tutorial.

    • 2. Disconnect the plugs for the autosampler battery.

    • 3. Disconnect the connector that plugs into the battery port of the sampler.

    • If disconnect battery before solar panel, this can damage the solar charger!

    编辑

  3. Autosampler Battery Replacement & Voltage Check (For Old & New Versions), Checking battery voltages: 步骤 2 中的图像 1，3 Autosampler Battery Replacement & Voltage Check (For Old & New Versions), Checking battery voltages: 步骤 2 中的图像 2，3 Autosampler Battery Replacement & Voltage Check (For Old & New Versions), Checking battery voltages: 步骤 2 中的图像 3，3

    • 4. Make sure multimeter is measuring in DC current (red boxes).

    • Make sure multimeter is measuring in Volts (blue box).

    • 5. Check the voltage of the lead acid autosampler battery. Fully charged lead acid battery should be around 13-14 V.

    • Remember: Red to red and black to black!

    • 6. Check the voltage of the lithium ion node battery. Fully charged lithium ion battery should around 4 V.

    编辑

  4. Autosampler Battery Replacement & Voltage Check (For Old & New Versions), Reconnect the batteries: 步骤 3 中的图像 1，3 Autosampler Battery Replacement & Voltage Check (For Old & New Versions), Reconnect the batteries: 步骤 3 中的图像 2，3 Autosampler Battery Replacement & Voltage Check (For Old & New Versions), Reconnect the batteries: 步骤 3 中的图像 3，3

    • 7. First reconnect the autosampler battery (black box).

    • 8. Then reconnect lithium ion battery in the node (blue box).

    • Remember to plug in the other connector into the autosampler.

    • 9. Secure solar charge controller to the side of the enclosure using velcro (red box).

    • Then plug in the solar panel last (orange box).

    编辑
终点

3等其他人完成本指南。

作者

与1其他贡献者

Brooke Mason

于05/29/19注册

2,928 声望

创作了17篇指南

徽章: 21

+ 18更多徽章

团队

Open-Storm Open-Storm 的会员

Community

14 名成员

创作了24篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 0

总计 150