跳转到主内容

简介

Before starting this guide you may need some experience with soldering/ desoldering. If you do not know how, you can learn by clicking the link on step 5 (when you have to desolder the wires).

  1. Before disassembling your Atari Lynx, be sure the device is powered off.
    • Before disassembling your Atari Lynx, be sure the device is powered off.

    • Remove any game in the console by opening the right latch and sliding the game to the right.

  2. Remove the four 35 mm Phillips #1 screws at each corner of the backside on the Atari Lynx.
    • Remove the four 35 mm Phillips #1 screws at each corner of the backside on the Atari Lynx.

    • Pinch the rear panel with your fingers and lift away from the Atari.

  3. Remove the battery panel by pinching the sides with your fingers and lifting it away from the Atari.
    • Remove the battery panel by pinching the sides with your fingers and lifting it away from the Atari.

    • Be sure not to tear any wires attached to battery panel.

  4. PC 笔记本电池

    An easy fix for a big power boost.

    现在开始购物

    PC 笔记本电池

    An easy fix for a big power boost.

    现在开始购物
  5. Remove the control panel by pinching the sides with your fingers and lifting  it away from the Atari.
    • Remove the control panel by pinching the sides with your fingers and lifting it away from the Atari.

    • Be sure not to tear the speaker wire while removing the control panel.

  6. Desolder both the black and red wire as shown.
    • Desolder both the black and red wire as shown.

    • If you need help with basic desoldering, click here.

  7. Desolder the black wire as shown.
    • Desolder the black wire as shown.

  8. Desolder the white wire and then the red wire as shown. Desolder the white wire and then the red wire as shown.
    • Desolder the white wire and then the red wire as shown.

  9. Desolder the white wire as shown in order for the battery pack to be completely removed from the device.
    • Desolder the white wire as shown in order for the battery pack to be completely removed from the device.

结论

To reassemble your device, follow these instructions in reverse order.

John Lopez

于2014年01月27日注册

440 信誉积分

创作了4篇指南

团队

Cal Poly, Team 1-42, Maness Winter 2014 Cal Poly, Team 1-42, Maness Winter 2014 的会员

CPSU-MANESS-W14S1G42

5 名成员

创作了13篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 8

总计 999