Assembling the case - iFixit 维修指南

简介

These instructions will help you to close the machine housing of your Jura Impressa F50 coffee machine again.

你所需要的

步骤 1 Assembling the case

Reinstall the left side panel.
Put on the side wall and make sure that the lugs are snapped into the slots provided. Then slide the side panel slightly forward. The side panel should audibly snap into place when pushed forward.

步骤 2

Reinstall the right side panel.
First attach the side wall and make sure that the lugs have snapped into the slots provided. Then slide the side panel slightly forward. The side panel should audibly snap into place when pushed forward.

步骤 3

Assembling the case: 步骤 3 中的图像 1，1

Place the housing cover back on the coffee maker.

步骤 4

Assembling the case: 步骤 4 中的图像 1，2

Assembling the case: 步骤 4 中的图像 2，2

Use the Torx T15 screwdriver to tighten the 2 countersunk screws on the housing cover.

步骤 5

Assembling the case: 步骤 5 中的图像 1，2

Assembling the case: 步骤 5 中的图像 2，2

Using the oval head wrench, tighten the 4 oval head screws on the back of the machine.

步骤 6

Assembling the case: 步骤 6 中的图像 1，3

Assembling the case: 步骤 6 中的图像 2，3

Assembling the case: 步骤 6 中的图像 3，3

Replace the water tank,
the drip tray with drip tray, pulp tray and pulp container,
and place the aroma protection cover back on.

终点

另外一个人完成了本指南。

由衷感谢以下译者：

de en

100%

oldturkey03

oldturkey03正在帮助我们修复这个世界！您也想加入吗？
开始翻译 ›

作者

与3其他贡献者

Natalie

于05/08/19注册

738 声望

创作了4篇指南

+ 5更多徽章

团队

KMM 2019SS KMM 2019SS 的会员

Community

11 名成员

创作了8篇指南

0条评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 1

过去 30 天： 19

总计 786