Skip to main content

介绍

This guide will help you replace the battery in your Archos 5 tablet. Although this repair is pretty lengthy, don't be discouraged. You can do this yourself!

  1. Please be sure that your device is powered off before attempting any repairs.
    • Please be sure that your device is powered off before attempting any repairs.

    • Please be aware that any further steps could possibly void the warranty of your Archos 5.

  2. Use the plastic opening tool to take off 3 black sticky pads that cover the screws. Use the screwdriver(PH000) to remove the screws located under the pads.
    • Use the plastic opening tool to take off 3 black sticky pads that cover the screws.

    • Use the screwdriver(PH000) to remove the screws located under the pads.

    • Lift the stand in order to get to the fourth screw.

  3. Carefully pry open all 4 sides of the Archos 5 using the plastic opening tool. Once all sides of the device are pried open, gently open the device .
    • Carefully pry open all 4 sides of the Archos 5 using the plastic opening tool.

    • Once all sides of the device are pried open, gently open the device .

    • Be careful not to tear the foil which connects the LCD screen to the motherboard!

  4. Android 维修工具包

    一个新的屏幕或电池就在一个套件之内。

    现在开始购物

    Android 维修工具包

    一个新的屏幕或电池就在一个套件之内。

    现在开始购物
  5. Once you have opened your device, fold the screen away from the battery. Metal spudgers can puncture an unprotected battery, potentially causing a fire. When working with electronics, it's important to choose a tool that's ESD-safe to avoid accidental damage to the device. The regular black nylon spudger or a plastic opening tool should be used whenever possible.
    • Once you have opened your device, fold the screen away from the battery.

    • Metal spudgers can puncture an unprotected battery, potentially causing a fire. When working with electronics, it's important to choose a tool that's ESD-safe to avoid accidental damage to the device. The regular black nylon spudger or a plastic opening tool should be used whenever possible.

    • Unplug the touch pad from the motherboard. Do this by applying pressure on the thin black piece(attached at the bottom of the metallic foil) Press the plastic spudger against the thin black piece and release it.

  6. Separate the grey tape by using a plastic spudger. The tape is holding the battery in place.
    • Separate the grey tape by using a plastic spudger. The tape is holding the battery in place.

  7. Now begin to remove the battery by prying it away with the plastic spudger.  Please note that the battery is glued to the device. Be careful when prying the battery away from the device. Wiggle the plastic spudger under the battery if necessary to loosen the glue. Be careful when prying the battery away from the device. Wiggle the plastic spudger under the battery if necessary to loosen the glue.
    • Now begin to remove the battery by prying it away with the plastic spudger. Please note that the battery is glued to the device.

    • Be careful when prying the battery away from the device. Wiggle the plastic spudger under the battery if necessary to loosen the glue.

  8. Locate 3 wires(red, blue and black) that connect the motherboard and the battery.
    • Locate 3 wires(red, blue and black) that connect the motherboard and the battery.

  9. After locating the wires (red, blue, and black) firmly pull the wires using tweezers and release them from the motherboard. Continue to does this to the remaining two wires. Continue to does this to the remaining two wires.
    • After locating the wires (red, blue, and black) firmly pull the wires using tweezers and release them from the motherboard.

    • Continue to does this to the remaining two wires.

  10. Once the wires have all been released remove the battery from the device and replace with a new battery. To reattach the new battery wires please refer to this guide on How To Solder
    • Once the wires have all been released remove the battery from the device and replace with a new battery. To reattach the new battery wires please refer to this guide on How To Solder

结论

To reassemble your device, follow these instructions in reverse order.

5等其他人完成本指南。

Ally Hummel

于2015年09月22日注册

375 Reputation

创作了3篇指南

2 Comments

Where I can find this battery?

mitkekg - 回复

CA564889 - Battery

mitkekg - 回复

Add Comment

View Statistics:

Past 24 Hours: 11

Past 7 Days: 38

Past 30 Days: 173

All Time: 4,365