跳转到主内容

Apple iPod Dock Connector Cable Replacement

你所需要的

  1. Apple iPod Dock Connector Cable Replacement, iPod Dock Connector Cable: 步骤 1 中的图像 1,3 Apple iPod Dock Connector Cable Replacement, iPod Dock Connector Cable: 步骤 1 中的图像 2,3 Apple iPod Dock Connector Cable Replacement, iPod Dock Connector Cable: 步骤 1 中的图像 3,3
    • Unscrew the four Phillips screws on the backside of the docking system.

    • The screws are located quite deep. Make sure you have a long screwdriver to be able to reach the screws.

    • Be aware of the plastic threads. Using too much force can tear this up.

  2. Apple iPod Dock Connector Cable Replacement: 步骤 2 中的图像 1,1
    • Separate the housing in two parts.

    • The dock connector is slid in two parts on the top of the system, make sure you slide the two housing parts in this line of direction.

    • The two parts are glued on the sides of the speakers. Use some force to separate the two housing parts.

    • The internal parts are still connected to each other. Don't pull the housing parts too far from each other.

  3. Apple iPod Dock Connector Cable Replacement: 步骤 3 中的图像 1,1
    • Slide the dock connector out of the housing part.

  4. Apple iPod Dock Connector Cable Replacement: 步骤 4 中的图像 1,1
    • Unscrew the three screws using a Phillips #2 screwdriver to remove the T-shaped circuit board holder.

  5. Apple iPod Dock Connector Cable Replacement: 步骤 5 中的图像 1,1
    • Remove the T-shaped circuit board holder.

  6. Apple iPod Dock Connector Cable Replacement: 步骤 6 中的图像 1,1
    • Remove the circuit board from the housing part.

    • The circuit board is still connected to another circuit board with a cable.

  7. Apple iPod Dock Connector Cable Replacement: 步骤 7 中的图像 1,1
    • Disconnect the 5-pin connector between the two circuit boards.

    • The connectors are tightly connected. Hold the other circuit board to prevent it from breaking while disconnecting the 5-pin connector.

  8. Apple iPod Dock Connector Cable Replacement: 步骤 8 中的图像 1,2 Apple iPod Dock Connector Cable Replacement: 步骤 8 中的图像 2,2
    • Look how the cables are oriented.

    • Take a picture with your phone. It's easier to look it up than recalling your memory.

  9. Apple iPod Dock Connector Cable Replacement: 步骤 9 中的图像 1,1
    在这个步骤中使用的工具:
    Desoldering Pump
    $3.99
    购买
  10. Apple iPod Dock Connector Cable Replacement: 步骤 10 中的图像 1,1
    • Heat up the solder.

    • If you don't want to damage your workspace, it's probably handy to place something underneath.

    • The circuit board will be getting hot. To make it more stable you can clamp it in a vise or alligator clips.

    • The heated solder tends to fume—do not inhale this! Do this in a well ventilated room.

  11. Apple iPod Dock Connector Cable Replacement: 步骤 11 中的图像 1,2 Apple iPod Dock Connector Cable Replacement: 步骤 11 中的图像 2,2
    • If the solder becomes fluid, keep the desoldering pump near the solder.

    • Push the button on the desoldering pump to suck the solder.

    • Solder will solidify fast, so you need to act quickly.

  12. Apple iPod Dock Connector Cable Replacement: 步骤 12 中的图像 1,1
    • Strip the cables with a wire stripper.

  13. Apple iPod Dock Connector Cable Replacement: 步骤 13 中的图像 1,2 Apple iPod Dock Connector Cable Replacement: 步骤 13 中的图像 2,2
    • Check if the cable is in the right position.

    • Heat up the contact point on the circuitboard.

    • If the contact point is hot enough, you can add a little bit of solder.

    • Don't inhale the fumes.

结论

Om het apparaat weer te monteren, volg je deze instructies in omgekeerde volgorde vanaf stap 7.

0条评论

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 1

过去 30 天: 22

总计 479