跳转到主内容

你所需要的

  1. Apple AirPort Extreme Model A1034 USB Port Replacement, Outer Case: 步骤 1 中的图像 1,1
    • Remove the three 14.3mm T7 Torx screws from the bottom of AirPort.

  2. Apple AirPort Extreme Model A1034 USB Port Replacement: 步骤 2 中的图像 1,1
    • Remove the 5.1mm Phillips screw from the bottom of the AirPort. This screw is located under the identification sticker. You will have to remove the sticker or make a hole to remove it.

  3. Apple AirPort Extreme Model A1034 USB Port Replacement: 步骤 3 中的图像 1,2 Apple AirPort Extreme Model A1034 USB Port Replacement: 步骤 3 中的图像 2,2
    • Lift the bottom and top casing straight apart and then lift metal casing straight up from the bottom plastic casing.

  4. Apple AirPort Extreme Model A1034 USB Port Replacement: 步骤 4 中的图像 1,1
    • Unplug the black connector on the top of the metal casing by gently pulling horizontally.

  5. Apple AirPort Extreme Model A1034 USB Port Replacement, Motherboard: 步骤 5 中的图像 1,1
    • Remove the four 4.3mm phillips screws from the bottom of the metal casing.

  6. Apple AirPort Extreme Model A1034 USB Port Replacement: 步骤 6 中的图像 1,1
    • Lift and separate the top and bottom of the metal casing. You will now expose the motherboard and the AirPort card.

    • To remove the AirPort card, gently pull the plastic tab horizontally.

  7. Apple AirPort Extreme Model A1034 USB Port Replacement: 步骤 7 中的图像 1,1
    • Locate and remove the three 5.0mm phillips screws from the heat sink.

    • Lift to remove the heat sink from the motherboard.

  8. Apple AirPort Extreme Model A1034 USB Port Replacement: 步骤 8 中的图像 1,2 Apple AirPort Extreme Model A1034 USB Port Replacement: 步骤 8 中的图像 2,2
    • Locate and remove the five 7.5mm phillips screws from the motherboard.

    • Lift and separate the motherboard from the bottom metal casing.

    • There will be a loose hexagonal female screw extender under the motherboard.

  9. Apple AirPort Extreme Model A1034 USB Port Replacement, USB Port: 步骤 9 中的图像 1,2 Apple AirPort Extreme Model A1034 USB Port Replacement, USB Port: 步骤 9 中的图像 2,2
    • Desolder the six connections located under the USB.

    • Refer to 如何焊接和拆焊 for soldering techniques.

结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

Michael Garcia

于2011年10月12日注册

411 声望

创作了5篇指南

团队

Cal Poly, Team 17-15, Regan Fall 2011 Cal Poly, Team 17-15, Regan Fall 2011 的会员

CPSU-REGAN-F11S17G15

3 名成员

创作了13篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 3

过去 30 天: 9

总计 3,032