Alienware 17 R2 Status-Light Board Replacement - iFixit 维修指南

你所需要的

步骤 1 Disconnecting the Status-Light Board

WARNING : Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer.
Make sure base panel is removed.
Make sure palm rest is removed.
Lift the latch and disconnect the status-light board to the palm-rest assembly.

步骤 2 Removing the Screws

Remove the screws that secure the status-light board to the palm-rest assembly.

步骤 3 Lifting the Status-Light Board

Alienware 17 R2 Status-Light Board Replacement, Lifting the Status-Light Board: 步骤 3 中的图像 1，1

Lift the status-light board off the palm-rest assembly.

步骤 4 Screw Align

Alienware 17 R2 Status-Light Board Replacement, Screw Align: 步骤 4 中的图像 1，1

Align the screw holes on the status-light board with the screw holes on the palm-rest assembly.

步骤 5 Screw Replacement

Alienware 17 R2 Status-Light Board Replacement, Screw Replacement: 步骤 5 中的图像 1，1

Replace the screws that secure the status-light board to the palm-rest assembly.

步骤 6 Sliding the Status-Light Board

Alienware 17 R2 Status-Light Board Replacement, Sliding the Status-Light Board: 步骤 6 中的图像 1，1

Slide the status-light board cable into the connector on the status-light board and press down the latch to secure the cable.

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

作者

与2其他贡献者

Terrence15

于12/18/17注册

79,121 声望

创作了441篇指南

+ 25更多徽章

团队

RampUP America, Inc. RampUP America, Inc. 的会员

Community

42 名成员

创作了1,986篇指南

0条评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 6

过去 30 天： 15

总计 297