配件

无需配件。

WARNING :  Before working inside your computer, read the  safety information that shipped with your computer and  follow the steps in Before Working Inside Your Computer.  After working inside your computer, follow the instructions  in After Working Inside Your Computer.
  • WARNING : Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer.

  • Lift the latches and disconnect the keyboard cable, keyboard-backlight cable, macro-keys cable and macro-keys backlight cable from the system board.

添加评论

Remove the screws that secure the palm-rest assembly to the computer base.
  • Remove the screws that secure the palm-rest assembly to the computer base.

添加评论

  • Lift the computer base slightly and push the palm-rest assembly through the slot on the computer base to release the tabs on the palm-rest assembly.

添加评论

  • Turn the computer over and open the display as far as possible.

添加评论

  • Using a plastic scribe, pry up along the edges of the palm rest assembly.

添加评论

  • Gently lift the palm-rest assembly and turn it over.

添加评论

  • Peel the tape that secures the power-button cable to the system board.

添加评论

  • Disconnecting the power-board cable from the system board.

添加评论

  • Lift the palm-rest assembly off the computer base.

添加评论

  • Remove the power-button board.

添加评论

  • Remove the status-light board.

添加评论

  • Remove the keyboard bracket.

添加评论

  • Remove the touch pad.

添加评论

  • Replace the touch pad.

  • Replace the keyboard.

  • Replace the status-light board.

  • Replace the power-button board.

添加评论

  • Connect the power-button cable to the system board.

添加评论

  • Adhere the tape that secures the power button cable to the system board.

添加评论

  • Slide the keyboard cable, keyboard-backlight cable, macro-keys cable and macro-keys backlight cable through the slot on the computer base.

添加评论

  • Align the palm-rest assembly on the computer base and snap it into place.

添加评论

  • Close the display and turn the computer over.

添加评论

  • Replace the screws that secure the palm-rest assembly to the computer base.

添加评论

  • Slide the keyboard cable, keyboard-backlight cable, macro-keys cable and macro-keys backlight cable into their respective connectors and press down the latches to secure the cables to the system board.

添加评论

结论

To reassemble your device, follow these instructions in reverse order.

Terrence15

于2017年12月18日注册

69,401 信誉积分

创作了442篇指南

团队

Informative Technologies Inc. Informative Technologies Inc. 的会员

Community

15 名成员

创作了917篇指南

添加评论

浏览统计数据:

过去的24小时: 1

过去的7天: 4

过去的30天: 12

总计 62