简介

The Motherboard is the most complicated part of the phone to remove because almost all of the phones components are connected to it. This guide will show you how to properly remove the Alcatel Pop 4 Plus Motherboard in a few simple steps. Be gentle with removing the connectors and make sure you line them up properly when snapping them back together.

配件

无需配件。

Remove the back cover by sliding your fingernail in the grove around the edge of the phone and prying it off.
  • Remove the back cover by sliding your fingernail in the grove around the edge of the phone and prying it off.

添加评论

Remove seventeen 3mm Phillips #000 screws from the mid-frame.
  • Remove seventeen 3mm Phillips #000 screws from the mid-frame.

添加评论

  • Use the flat end of the spudger, or your fingernail, to pry off the mid-frame.

添加评论

  • Use the flat end of the spudger disconnect the battery from the motherboard.

  • Use the flat end of the spudger tool to pry out the battery.

添加评论

  • Use a spudger to flip up the retaining flap on the USB ribbon cable ZIF socket.

  • Slide the ribbon cable out of the socket.

添加评论

  • Use the flat end of a spudger to disconnect the ribbon cable.

添加评论

  • Using the flat end of the spudger to disconnect the ribbon cable.

添加评论

  • Using the flat end of the spudger, disconnect the camera from the motherboard.

添加评论

  • Use the flat end of the spudger to pry off the motherboard.

添加评论

结论

To reassemble your device, follow these instructions in reverse order.

Pieter Molenaar

于2018年01月25日注册

171 信誉积分

撰写一个指南

团队

USF Tampa, Team S20-G6, Passmore Spring 2018 USF Tampa, Team S20-G6, Passmore Spring 2018 的会员

USFT-PASSMORE-S18S20G6

4 名成员

创作了6篇指南

添加评论

浏览统计数据:

过去的24小时: 3

过去的7天: 5

过去的30天: 32

总计 126