Alcatel Jitterbug Smart Charging Port Replacement

Minyu Zhang 和 3 其他贡献者

最后更新于 August 15, 2021

25分钟

困难

简介

转到步骤 1

Use this guide to replace the Charging Port of Alcatel Jitterbug Smart.

This guide requires the ability to desolder the charging port from the motherboard. For more information on how to solder and desolder connections, please visit this guide.

你所需要的

工具

步骤 1 Battery

Alcatel Jitterbug Smart Charging Port Replacement, Battery: 步骤 1 中的图像 1，2

Alcatel Jitterbug Smart Charging Port Replacement, Battery: 步骤 1 中的图像 2，2

Pry back cover open with a medal spudger, or your fingernail, in the divot at the bottom left corner of the phone.
Lift open case by the corner nearest the divot and remove it from the phone.

编辑

步骤 2

Alcatel Jitterbug Smart Charging Port Replacement: 步骤 2 中的图像 3，3

Remove 13 1mm JIS screws with JIS #000 Screwdriver.

编辑

步骤 3

Gently pry off the Mid frame from the phone using a Metal Spudger.

编辑

步骤 4

在这个步骤中使用的工具：

Tweezers

$4.99

添加到购物车

Use a pair of tweezers to pull the battery connector from its port.
Be careful not to tear the battery from its connection.

编辑

步骤 5 Motherboard

Alcatel Jitterbug Smart Charging Port Replacement, Motherboard: 步骤 5 中的图像 1，3

Alcatel Jitterbug Smart Charging Port Replacement, Motherboard: 步骤 5 中的图像 2，3

Alcatel Jitterbug Smart Charging Port Replacement, Motherboard: 步骤 5 中的图像 3，3

Use the Plastic Opening tools to gently dislodge the two connection on the top and bottom right of the phone from the inside of the phone.

编辑

步骤 6

在这个步骤中使用的工具：

Tweezers

$4.99

添加到购物车

Use a pair of tweezers to pull the black ribbon connector from its port.
Use a metal Spudger to gentle remove the speaker that glued at the bottom left of the phone.
Be careful to avoid damage the black connector or the wire connect the speaker to motherboard.

编辑

步骤 7

Using a plastic opening tool, begin to gently pry the motherboard, away from the display assembly.
The motherboard will freely remove.

编辑

步骤 8 Charging Port

Alcatel Jitterbug Smart Charging Port Replacement, Charging Port: 步骤 8 中的图像 1，2

Alcatel Jitterbug Smart Charging Port Replacement, Charging Port: 步骤 8 中的图像 2，2

Flip the motherboard over and desolder the charging port pin connecting on the motherboard.
Once pins desolder, pull off the charging port.
If you need helps on solder/desolder, here is the link to the soldering skills guide.