跳转到主内容

简介

The replacement of the motherboard requires the complete removal of the battery, trigger buttons, joy sticks, and vibrations motors. All of which will require soldering for removal.

配件

没有特定配件。

  1. Lay the controller face down on a flat surface and remove the seven 9mm Phillips #0 screws on the back of the controller. Lift up and remove the controller back plate.
    • Lay the controller face down on a flat surface and remove the seven 9mm Phillips #0 screws on the back of the controller.

    • Lift up and remove the controller back plate.

  2. Desolder the battery connection from the motherboard.
    • Desolder the battery connection from the motherboard.

    • Use this guide for more information on soldering.

  3. Unscrew the two 9mm Phillips #0 screws that secure the motherboard to the controller front plate. Unscrew the two 9mm Phillips #0 screws that secure the motherboard to the controller front plate.
    • Unscrew the two 9mm Phillips #0 screws that secure the motherboard to the controller front plate.

  4. Detach the main motherboard fom the front pate by carefully pulling it off. Be careful of the trigger buttons when pulling out the motherboard. The bottons have mini-motherboards secured in place on the front plate. Carefully pull these out.
    • Detach the main motherboard fom the front pate by carefully pulling it off.

    • Be careful of the trigger buttons when pulling out the motherboard. The bottons have mini-motherboards secured in place on the front plate. Carefully pull these out.

  5. Remove two button padding from the back of motherboard. Remove two button padding from the back of motherboard.
    • Remove two button padding from the back of motherboard.

  6. Desolder the four button connections from the motherboard. Desolder the joy stick connections located on the front.
    • Desolder the four button connections from the motherboard.

    • Desolder the joy stick connections located on the front.

    • Use this guide for more information on soldering.

结论

To reassemble your device, follow these instructions in reverse order.

Natalie Cox

于2017年02月17日注册

201 信誉积分

创作了2篇指南

团队

USF Tampa, Team S19-G5, Hoffman Spring 2017 USF Tampa, Team S19-G5, Hoffman Spring 2017 的会员

USFT-HOFFMAN-S17S19G5

4 名成员

创作了8篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 2

过去的30天: 9

总计 382