跳转到主内容

修复你的物品

维修的权力

配件 & 工具

简介

The fan is responsible for self cooling the computer during operation. Without a working fan, your computer is prone to overheating and continually shutting down. This guide will help you replace your faulty or broken fan in your ASUS Transformer Book Flip TP500LA.

  1. Remove the ten 10 mm Phillips #0 screws found on the computer's back case. Remove the ten 10 mm Phillips #0 screws found on the computer's back case. Remove the ten 10 mm Phillips #0 screws found on the computer's back case.
    • Remove the ten 10 mm Phillips #0 screws found on the computer's back case.

  2. Slide a heavy-duty spudger between the back case and the computer. Slowly work around the edges to undo the clips to fully separate the back case from the computer.
    • Slide a heavy-duty spudger between the back case and the computer.

    • Slowly work around the edges to undo the clips to fully separate the back case from the computer.

    • Gently lift off the back case.

  3. Slide a heavy-duty spudger into the ZIF connector and gently flip up the retaining flap to open the connector. Pull the blue tab to remove the ribbon.
    • Slide a heavy-duty spudger into the ZIF connector and gently flip up the retaining flap to open the connector.

    • Pull the blue tab to remove the ribbon.

  4. 任天堂 Switch 套装

    快速恢复到游戏的状态

    购买 Switch 套装

    任天堂 Switch 套装

    快速恢复到游戏的状态

    购买 Switch 套装
  5. Remove the three 5 mm Phillips #0 screws. Remove the single 6 mm Phillips #0 screw.
    • Remove the three 5 mm Phillips #0 screws.

    • Remove the single 6 mm Phillips #0 screw.

  6. Use the heavy-duty spudger to pry the white 8-pin connector away from the motherboard. Gently pull the connector away from the motherboard.
    • Use the heavy-duty spudger to pry the white 8-pin connector away from the motherboard.

    • Gently pull the connector away from the motherboard.

    • The black 8-pin connector on the motherboard is very fragile, so be careful when removing the white 8-pin connector.

  7. Use the blue plastic opening tool to loosen and remove the three black wires from the battery. Slide the battery out from the computer to remove.
    • Use the blue plastic opening tool to loosen and remove the three black wires from the battery.

    • Slide the battery out from the computer to remove.

  8. Unscrew the six 5 mm Phillips #0 screws. Unscrew the six 5 mm Phillips #0 screws.
    • Unscrew the six 5 mm Phillips #0 screws.

  9. Grasp the top of the 3-pin connector with tweezers. Wiggle the connector until it loosens itself from the motherboard. Gently lift the connector from the motherboard attachment.
    • Grasp the top of the 3-pin connector with tweezers.

    • Wiggle the connector until it loosens itself from the motherboard.

    • Gently lift the connector from the motherboard attachment.

  10. Carefully lift the fan off the motherboard.
    • Carefully lift the fan off the motherboard.

    • Attached to the fan is thermal pasting that needs to be reapplied when attaching the fan back to the motherboard. Follow this guide to reapply thermal pasting correctly.

结论

To reassemble your device, follow these instructions in reverse order.

4等其他人完成本指南。

Solomon Dovinh

于2017年04月10日注册

379 信誉积分

创作了2篇指南

团队

Cal Poly, Team S13-G5, Forte Spring 2017 Cal Poly, Team S13-G5, Forte Spring 2017 的会员

CPSU-FORTE-S17S13G5

4 名成员

创作了6篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 7

过去的30天: 26

总计 1,335