修复你的物品 社区 商店

4Sight 9 Battery Replacement

简介

Use this guide to replace the battery on the 4Sight 9

你所需要的

  1. 4Sight 9 Battery Replacement, Cover: 步骤 1 中的图像 1，2 4Sight 9 Battery Replacement, Cover: 步骤 1 中的图像 2，2

    • Place the tablet on its side so that the two screws are facing upward.

    • Remove two 1 mm screws from the left side of the tablet using a Phillips #00 screwdriver.

    编辑

  2. 4Sight 9 Battery Replacement: 步骤 2 中的图像 1，1

    • Pry the case away from the device slowly by sliding a plastic opening tool along the device.

    • Once loosened, use your hands to separate the case from the device.

    编辑

  4. 4Sight 9 Battery Replacement: 步骤 3 中的图像 1，2 4Sight 9 Battery Replacement: 步骤 3 中的图像 2，2

    • Hold the positive and negative wires as close as possible to the speaker.

    • Use an opening tool and fingers to simultaneously lift the speaker from the cover.

    编辑

  5. 4Sight 9 Battery Replacement, Battery: 步骤 4 中的图像 1，1

    • Use soldering gun to remove the positive and negative wires connecting the battery to the circuit board.

    • For a complete guide on how to solder, click here.

    编辑

  6. 4Sight 9 Battery Replacement: 步骤 5 中的图像 1，2 4Sight 9 Battery Replacement: 步骤 5 中的图像 2，2

    • Insert plastic prying tool under upper-hand corner of battery and slide back and forth.

    • Once loosened, insert plastic prying tool under lower-hand corner and repeat sliding action.

    • Repeat previous actions until battery comes loose from device.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

7等其他人完成本指南。

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 2

过去 30 天： 9

总计 1,643