跳转到主内容

修复你的物品

维修的权力

商店

简介

移除并更换13寸 MacBook Pro 一体化机型底壳。

  1. 卸下下列十个螺丝
    • 卸下下列十个螺丝

    • 3个 14.4 mm Phillips #00 螺丝

    • 3个 3.5 mm Phillips #00 螺丝

    • 4个 3.5 mm 肩部 Phillips #00 螺丝

    • 装回小螺丝时,将其垂直于外壳的轻微弯曲对齐(不是直着往下对齐的)。

    How much weight can I save by removing the optical drive?

    gunes314 - 回复

    You can save a lot of weight if lets say your installing a solid state drive or putting in a second hard drive but if you know that you use the CD/DVD disc drive a lot then you might just want to leave the drive alone.

    Marshall WahlstromHelgren -

    Tip: Use one of those weekday pill holders to have a cheep way to store screws you remove and each day of the week can be for different sizes or parts. It has been handy to have (much less expensive than the magnetic mat.

    Robert Wacker - 回复

    Hello, where can I buy the screws I need in case I lose one of them?

    taylornya - 回复

    I have one stripped screw... How opening without drill it?! Any suggestions please?

    rodrigosady - 回复

    I also stripped a couple screws. I wasn’t able to open it up without drilling. After drilling the heads and removing the cover it was easy to hacksaw the tip and unscrew with a standard driver.

    Michael Wilkens -

    My top tip - make sure you buy good quality Phillips screwdrivers and a magnetic holder. Cheap screwdrivers won’t get the screws undone safely. Without a magnetic holder you have no chance of getting the tiny crews in and out safely.

    jeremyyoung - 回复

    A good Phillips 00 is your friend here. Also, when reinserting the screws, gently start anticlockwise and you wil feel a click at the start of the thread. This tells you you’re in the right place and less likely to cross-thread through force in the wrong place.

    Iain Boyd - 回复

  2. 使用手指从靠近MacBook 风扇处撬开背盖。 移走背盖、
    • 使用手指从靠近MacBook 风扇处撬开背盖。

    • 移走背盖、

结论

请按逆序重组你的设备。

82等其他人完成本指南。

特别感谢这些译者︰

en zh

100%

Yuting Zhao正在帮助我们修复这个世界! 想要作出贡献?
开始翻译 ›

Andrew Optimus Goldheart

于2009年10月17日注册

470,331 信誉积分

创作了410篇指南

团队

iFixit iFixit 的会员

Community

134 名成员

创作了15,529篇指南

When purchasing a new bottom panel, do any of the stickers or pads have to be transferred to the new part? How?

Matthew Parrott - 回复

This is the instructions on how to just remove the bottom cover to access other components. The part is sold here on iFixit for $99 and looks to include the rubber feet.

Cwoodyard -

Where can I get a new backover?

SkyGamer - 回复

The back cover is sold here and can be found at the top of the page.

Cwoodyard -

Can i buy this bottom replacement piece here or is this instructions on how to do it?

itsRadioBiz - 回复

These are instruction on how to replace the cover as if it came with the screws and rubber feet. There are other tutorials on this site on replacing the rubber feet and they do sell the bottom casing (with the rubber feet) and screws here.

Cwoodyard -

Guys, I respect you really. Your effort and hard work through all this years is trully remarkable. A R.T.R rulz! Shout out! Thanks for all guides, teardowns, for all that funky, cool stuff you’ve been disassembling and putting back together over and over again, and again. It is helpful. But this 99USD? What? For a 13 inch plate that’s been made of aluminium? Hm.. let me think…should i buy two plates of aluminium or a used, working Macbook? Wait a second. Maybe I can buy it for even less than this plates, cause the full price with shipping and fees would cost me somewhere around 270 USD. Great! All the best!

Igor - 回复

添加评论

浏览统计数据:

过去的24小时: 8

过去的7天: 62

过去的30天: 337

总计 55,754