Was dropped on its left back corner, where the DC in is. I disassembled the whole laptop, and checked the DC in board. Seemed ok. When reassembling, I made sure all the connections to the logic board were solid.
However, it still has the same problem - it simply won't power on. I reseated the ram too, and tried individual sticks on each slot. Still no change. When it's plugged into power, and I press the battery level indicator, it'll flash full.
声誉积分: 78.2千
385
96
162
Hi, Try resetting the SMC. Link on how to do this provided. Good luck.
这个答案有帮助吗？
I forgot to mention that I tried the SMC reset. I just tried it again, and still nothing. And response to the other commenter, when I took everything apart, all the connectors looked like they were connected properly, and as I was reassembling, I double checked it all.
The computer turns on every once in a great while, but it's rare.
声誉积分: 179
5
15
reseat flex connector from the keyboard and power button to the logic board maybe its not fully connected or intact....
这个答案有帮助吗？
过去 24 小时： 0
过去 7 天： 0
过去 30 天： 0
总计 427
