修复你的物品 社区 商店

Second generation of Wi-Fi iPad, released on March 11, 2011. Model number A1395. Repair is difficult and will require heat.

250 个问题 查看全部

更多选项

Digitizer replaced / Touchscreen does not work

Hello -

I had an iPad 2 WiFi with a cracked digitizer/glass. I ordered a replacement digitizer/front glass from a leading iPad parts company (no junk). I removed the old digitizer/glass and installed the new one. Everything went flawless and the video connector from the new digitizer is perfectly inserted into the board connector. All of the buttons work BUT I can not get the new digitizer to work. I even installed a second one I purchased just to make sure but I can not get the digitizer to work. Any suggestions? Thanks!

已回答！ 显示答案 我也有这个问题

这是一个好问题吗？

是 否
得分 2
添加一条评论

2个答案

筛选条件:
最有帮助的 最新 最老的
已选择的解决方案

更多选项

I have resolved the issue...thankfully. I have repaired electronics my whole life but it seems that the two-prong video connector cable off of the digitizer connects to the motherboard UPSIDE DOWN. I know that sounds strange, but if your digitizer does not work after replacing it, reverse these cables and put them in what most would think to be upside down (which in this case, is correct).

这个答案有帮助吗？

是 否
得分 3

2条评论:

what do you mean upside down?

how do you fix it?

i have the same problem

由完成的

This has resolve my issue!!

由完成的

添加一条评论

更多选项

I had same problem, make sure the white perferated line is facing up, my problem is half of the touch screen is unresponsive. Any help, something i did? Bad screen?

这个答案有帮助吗？

是 否
得分 2
添加一条评论

添加你的答案

rick 将永远感激不已
浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 1

总计 6,426