My screen is dark after digitizer repair

Question

iPad 2 GSM

GSM iPad 2 with 16, 32, or 64 GB of storage, and a Dual Core A5 Processor. Model Number A1396. Repair is complicated and requires heat and prying.

152 个问题查看全部

Robin @robin46555

声誉积分: 25

1

发帖于: 2012年6月29日

更多选项

My screen is dark after digitizer repair

i attempted to repair my digitizer and though it does come on, it is very dark

已回答！ 显示答案我也有这个问题

这是一个好问题吗？

是否

得分 2

3条评论

One of the Common pitfalls / issues is that the Back-light fuse blows..

Yes there is a fusible link that can blow / burn out.

If the Digitizer / LCD is removed with the power on etc.

Obviously try the DFU or boot method first, but two out of two Ipad 2 have done this on me recently.

Google it...

I have had two do this recently.

Worked with a broken Digitizer, then pulled apart and replaced, and obviously disconnected the LCD.

And low and behold op comes a very dim, if visible at all display..

Suggest you look at the You Tube clips and decide if the repair is within you capabilities..

由 David 完成的 2016年1月6日

Very simple repair. Hold the power button down until the "Slide To Power Off" screen shows up. Give it several seconds to shutdown then push the Power button to restart it. You get a bright screen again.

由 Wesley Hunt 完成的 2016年9月16日

This is the best simple, best answer I ever found in my life in Internet. Thanks a lot and God bless you

由 Hercules 完成的 2019年2月12日

添加一条评论

8个答案

已选择的解决方案

johnkustic @johnkustic

声誉积分: 943

4

2

1

发帖于: 2012年7月9日

更多选项

You need to do a hard reset. Hold down power and home button for 20 sec.

Hope it helps.

这个答案有帮助吗？

是否

得分 12

8条评论:

Lifesaver Thanks

由 Kaeyla 完成的 2014年8月29日

@johnkustic you're a clever one! I was about to believe I need to replace my back light! Thank you a lot!

由 reynanparico 完成的 2015年6月27日

my ipad is brand new not even turnd on yet but i press the home button and it turns on but sosososo dark almost black and it speeks to me but it says SCREEN LOCKED wat should i do ?

由 boo 完成的 2015年6月28日

Good grief! That scared me big time. Thanks for the tip - worked like a charm.

由 Joe Shaw 完成的 2015年9月26日

You the man. I too was a little worried there until I tried your fix.

由 Trevor Judge 完成的 2016年2月3日

显示更多的3条评论

添加一条评论

One of the Common pitfalls / issues is that the Back-light fuse blows..

Yes there is a fusible link that can blow / burn out.

If the Digitizer / LCD is removed with the power on etc.

Obviously try the DFU or boot method first, but two out of two Ipad 2 have done this on me recently.

Google it...

I have had two do this recently.

Worked with a broken Digitizer, then pulled apart and replaced, and obviously disconnected the LCD.

And low and behold op comes a very dim, if visible at all display..

Suggest you look at the You Tube clips and decide if the repair is within you capabilities.. — David
Very simple repair. Hold the power button down until the "Slide To Power Off" screen shows up. Give it several seconds to shutdown then push the Power button to restart it. You get a bright screen again. — Wesley Hunt
This is the best simple, best answer I ever found in my life in Internet. Thanks a lot and God bless you — Hercules
@johnkustic you're a clever one! I was about to believe I need to replace my back light! Thank you a lot! — reynanparico
my ipad is brand new not even turnd on yet but i press the home button and it turns on but sosososo dark almost black and it speeks to me but it says SCREEN LOCKED wat should i do ? — boo
Good grief! That scared me big time. Thanks for the tip - worked like a charm. — Joe Shaw
You the man. I too was a little worried there until I tried your fix. — Trevor Judge