跳转到主内容
加入维修社区 - 创建账户

苹果公司最小的iPhone 14于9月9日发布,配备了6.1英寸OLED显示屏,先进的双1200万像素相机系统,以及带自动对焦的前置相机。此机型取代iPhone 13。

Won't boot correctly after screen repair

I have done a screen replacement on an iPhone 14 and now it will not boot past the apple logo or recovery mode.

When I reattach the old screen the phone boots completely normal (no touch hence the screen replacement) I have now tried 2 different replacement screens and have the same issue, I did manage to get it into recovery mode and do an update via iTunes, but this has not helped.

Any suggestions appreciated!

已回答! 显示答案 我也有这个问题

这是一个好问题吗?

得分 0
添加一条评论

1个答案

已选择的解决方案

I have. few questions. And what I think may be the fix, depending.

Did it show normally in recovery mode? Did you transplant the little sensor cable from your old screen?

This could be the ambient light sensor. If you swapped the sensor cable over from the old screen, it's possible it was damaged slightly. Those are incredibly delicate and it is not uncommon for this issue to show the apple logo with full backlight but once it boots it defaults to minimum brightness. See if you can see the screen in a dark room. If so, you can replace this cable, but it will affect Face ID functionality.

Otherwise, how do you know its not booting correctly? What exactly does it do?

Replace the front sensor cable for an iPhone 14 model A2649, A2881, A2882, A2883, or A2884. Fix problems with sensor functions.图片

产品

iPhone 14 Front Sensor Cable

$23.99

这个答案有帮助吗?

得分 1

1条评论:

Hi

Yes, I transferred over the sensor cable, and it doesn't appear to be damaged. I have this morning taken the phone back apart, and the screen was working normally until I actually screwed in the bottom 2 screws now it turns on (makes charge noise when plugged in) but still black screen after the apple logo.

完成的

添加一条评论

添加你的答案

Danika Fox 将永远感激不已
浏览统计数据:

过去 24 小时: 0

过去 7 天: 2

过去 30 天: 29

总计 158