修复你的物品 社区 商店

模具型号A1707。于2017年6月上市，这台MacBook Pro的特征为配有Kaby Lake处理器，可升级至2.9GHz、可动态超频至3.9GHz四核英特尔酷睿i7处理器。

327 个问题 查看全部

更多选项

Is this a stripped display assembly hinge press fit? Suggested hacks?

Block Image

Block Image

Block Image

My MacBook Pro has a fully loose display hinge. After taking it apart, I believe what happened is that the holes where the hinges are press fit into the display assembly have been stripped but I’m not 100% sure since I don’t have an example on hand of what the press fit points are supposed to be like so I’d appreciate a knowledgeable second look. Both the left and right hinges easily fell out of the display assembly. There’s dark gray substance that seems like graphite on the push fit pin and flakes of it are spilling out of the push fit hole. I don’t know why a lubricant would be here though. Maybe it’s ground up aluminum?

This is the most closely related existing thread I could find:

The hinges snapped. Is there anyway to replace the hinges?

From searching online, my understanding is that there aren’t any removable pieces on the display so the only full fix would be a replacement display. Considering the age of the laptop and the cost of a replacement display, I don’t think it would make financial sense to go that route. Are there any recommendations for a hack repair? The obvious option is to try glueing the hinges in place. Any strong opinions for how to prep the surfaces or what adhesive to use?

Thanks!

已回答！ 显示答案 我也有这个问题

这是一个好问题吗？

是 否
得分 0
添加一条评论

1个答案

筛选条件:
最有帮助的 最新 最老的
已选择的解决方案

更多选项

Sadly yes Apple on the first series 2016/17 did use a press fit pin design, later the went into a key way design which prevented this issue as the display won’t stay at the angle you wish.

Apple did have a extended service offering for this issue but I think that’s expired at this point. The only option from Apple would be replacement of the display assembly which is quite expensive.

I have been successful using cyanoacrylate glue to hold things. After fully cleaning the pin and hole of any junk and greases use a toothpick to wipe the inner hole and quickly press the pin in making sure you get it in fully.

这个答案有帮助吗？

是 否
得分 1

2条评论:

I glued the hinges in place and the results are good. I see that you're a prolific answerer here and I'm sure it's an often a thankless task so I want to give a big thanks on behalf of all us randos who come to forums like this in our personal times of crisis with our questions. You people are angels. Thanks!!

由完成的

@khouli - Thanks! Just my ecology minded effort! Trying to keep as many older systems running as long as possible!

由完成的

添加一条评论

添加你的答案

Kevin Houlihan 将永远感激不已
浏览统计数据:

过去 24 小时： 0

过去 7 天： 6

过去 30 天： 32

总计 32