跳转到主内容

boots, but no chime, no display and solid white led after cleaning fan

i took my laptop apart to clean the built up dust and debris on the fan/heatsink and now when i boot the laptop, all i get is a solid white front led which stays on, but gets brighter when i close the display, no boot chime and no display. the usb ports have power as a mouse led is on, but nothing else. i have tried the pram reset but no avail. i tried the smc reset and i guess that works since the key combinations seem to work but after that, nothing. there is no response from the keyboard aka no caps light when pressed. i have taken a flashlight to the screen to see if the backlight may have quit, but when i look closely at the screen with the light, there is nothing flashing on the display. if i take the ram out, it tones with a single tone saying that there is no ram present. i switch ram out to a different slot, same thing happens as stated above.

已回答! 显示答案 我也有这个问题

这是一个好问题吗?

得分 0
添加一条评论

1个答案

已选择的解决方案

This sounds like a logic board issue did you fully remove the logic board cleaning the thermal paste and refreshing it?

这个答案有帮助吗?

得分 0

5条评论:

nope, didnt remove the heatsink. and i put all the cables back where they belong but still same issue. even triple checked the cables in case i missed something

完成的

@thereddrag0n - What does the battery checker tell you? With the MagSafe charger connected and has either an Amber or Green cord LED, then press the battery checker on the side do you get 10 tiny LED lights? Are they static or blinking?

完成的

battery shows its charging. 4 green led's and the magsafe is green then turns orange when connected

完成的

@thereddrag0n - That was my hail-Mary😡

Time to carefully review the logic board and the connections for damage, it could just bad timing something failed.

完成的

i think so too. might just be time to retire the old 13" and get something bigger and maybe a little faster.

完成的

添加一条评论

添加你的答案

thereddrag0n 将永远感激不已
浏览统计数据:

过去 24 小时: 0

过去 7 天: 0

过去 30 天: 1

总计 34