跳转到主内容

Repair and support for the controllers that shipped with the PS3. Released in November 2007 (Japan only) and 2008 (other countries), the six-axis lithium battery powered controller (CECHZC2) is straightforward to repair.

157 个问题 查看全部

Poured 91 percent alcohol into my PS3joysticks now only 4 buttons work

Poured alcohol into the joystick modules hoping to clear out any grime (didn't have a screwdriver on hand). Now none of the face buttons, or the right side trigger and shoulder buttons work). The start, select, and left joystick, and dpad all work. Anyway to fix this? Going to lowes to get a screwdriver soon.

回答此问题 我也有这个问题

这是一个好问题吗?

得分 0
添加一条评论

2个答案

to clean anything should be 99% iso not 91 because of the water content

这个答案有帮助吗?

得分 0
添加一条评论

The board most likely was damaged due to the alcohol being low percentage. I would recommend picking up a decent screwdriver set, I prefer iFixit sets but any 4mm set will work for most electronics. As for what you can do, you can clean the board with a toothbrush (not the same one you use for your mouth) and 99% Isopropyl alcohol.

best of luck, happy fixing.

这个答案有帮助吗?

得分 0
添加一条评论

添加你的答案

Cramp Montana 将永远感激不已
浏览统计数据:

过去 24 小时: 0

过去 7 天: 0

过去 30 天: 0

总计 21