修复你的物品 社区 商店

High-end gaming laptops produced by Alienware (a subsidiary of Dell since 2006).

162 个问题 查看全部

更多选项

X14 r1 Screen goes black when open past certain angle,probs LCD cable

i have an alienware x14 laptop and the screen is now black when it is open past a certain angle. i think it has to do with the display cable being loose or pinched and I dunno how to fix it myself. I tried, but the official guide was not seemingly consistent with the interior layout of the laptop and i couldnt get some of the screws out. am i screwed or is there a better way to do this besides checking in with a PC repair shop?

回答此问题 我也有这个问题

这是一个好问题吗？

是 否
得分 0
2条评论

I have the same issue? Did you happen to get this fixed?

由完成的

@davidk37190 I'm planning on getting it fixed, it seems i need the display assembly replaced considering how the computer's designed. it's a couple hundred USD for a fix right now but i'm a big procrastinator. fingers crossed to getting around to it

由完成的

添加一条评论

1个答案

筛选条件:
最有帮助的 最新 最老的
最有帮助的答案

更多选项

Hi @henrysutherland

Is this the service manual that you were looking at that didn't match the layout in your model?

If not, go to p.37 to view the procedure for installing the display assembly as this shows the routing of the display cable, between the motherboard and the display assembly.

Reading through it it seems that if it isn't lined up correctly then damage to the cable could occur.

This is what seems to be happening with your model i.e. damaged cable, given the symptoms that you described.

The manual also states that the display assembly is a complete module - see Note: Removing the display assembly on p.35, so it seems that if the cable is damaged, then it may be difficult to source a separate cable or even open the display assembly to access the LCD panel cable connector to replace it.

这个答案有帮助吗？

是 否
得分 1
添加一条评论

添加你的答案

Henry Sutherland 将永远感激不已
浏览统计数据:

过去 24 小时： 8

过去 7 天： 16

过去 30 天： 42

总计 122