If you do not connect the ribbon cable does it kill the keyboard?

Question

Logitech MX Mechanical

1 个问题查看全部

Marcello Bachechi @marcelloba92610

声誉积分: 1

发帖于: 2023年10月16日

更多选项

If you do not connect the ribbon cable does it kill the keyboard?

I was doing some repairs to my keyboard. It was working great, I needed to install the middle frame so I re-disconnected the ribbon cable and assembled everything, upon reassembling I forgot to connect the ribbon cable before connecting the battery, I realized the mistake, disconnected the battery connected the ribbon cable, and the keyboard acted like it was charging but was losing battery rapidly, pulled everything back apart checked the connections again and found that the connections were good but the device slowly died, and would not take a charge.

回答此问题我也有这个问题

这是一个好问题吗？

是否

得分 0

添加一条评论

2个答案

Ottobunny @ottobunnycoder 声誉积分: 605 9 1 · Answer 1 · 2023-10-16T13:22:42-07:00

Ottobunny @ottobunnycoder

声誉积分: 605

9

1

发帖于: 2023年10月16日

更多选项

It might have. I forgot to connect a cable in my old iMac and it killed the whole device. Then again, not all devices are the same. When you reconnected the cable and tested it, did it connect? Try keeping it plugged in, and see if you can connect it to your computer using a wired connection .

这个答案有帮助吗？

是否

得分 0

添加一条评论

Roman Sapronov @romano_soprano 声誉积分: 1 · Answer 2 · 2024-01-30T14:07:10-07:00

Roman Sapronov @romano_soprano

声誉积分: 1

发帖于: 2024年1月30日

更多选项

Might the keyboard reset will work?

Turn off and on the keyboard
Press the following key combinations - Esc+O (release) Esc+O (release) Esc+B
All Easy Switch light will blink continuously, wait for channel 1 to fast blink.
Turn off and on the keyboard to complete the reset process
If the Easy Switch does not blink, please repeat the above steps again

这个答案有帮助吗？

是否

得分 0

添加一条评论

Logitech MX Mechanical

If you do not connect the ribbon cable does it kill the keyboard?

2个答案

添加你的答案