Built a PC. Everything shows it is running. The screen is npt connecting to anything. I have tried different monitors and different setups, different hard drives. No BiOS or anything comes up.
ASUS Prime Z590-P WiFi motherboard
Intel Core i7 11700F processor
GTX PCIe 730 Graphics card
CORSAIR DDR4 16GB RAM
I have reset CMOS. I have taken everything out.
声誉积分: 450.6千
11
367
1.4千
Hi @familyfun37946,
Is the 16GB memory, 2 modules i.e. 2 x 8GB or one 16GB module? Depending on number of memory modules have you installed them as per p.1-5 of the user manual?
The PC may not be passing POST (power on self test)
Try connecting a system speaker (example only) to the speaker pins on the System Panel connector on the motherboard (see p.1-20 of the manual for location of header and speaker pins) and check for any beep error codes (see beep code table on p.2-19).
这个答案有帮助吗？
They are two different sticks. They are seated in properly and everything. They even light up.
I will try the speaker test. It did not come with one, so I will have to get one. Thanks!
过去 24 小时： 0
过去 7 天： 0
过去 30 天： 1
总计 37
