声誉积分: 95
3
1
I am refurbishing this iPhone XR to sell but it continues to have an issue where the bottom-right corner of the display and the portion above the lightning port bulge out from the device around 1/2 a mm from the frame. One of the screws also refuses to go in. I have already verified that the battery is not expanding and everything appears to be in order.
Thanks in advance,
TG2992
声誉积分: 563
9
8
13
Open it up and check around the seal and screen for dirt. Also check for stray screws, especially around the magnet on the speaker. Make sure the metal parts protruding from the screen are straight so they'll go inside rather than pressing against the frame.
这个答案有帮助吗？
Thanks, but this didn't help. I even tried removing the entire charging assembly without success.
Thanks, TG2992
@lauracate I doubt the charging assembly would affect it. As Alicia C says, add some pics. Especially the area where it seems to be causing the problem.
过去 24 小时： 0
过去 7 天： 0
过去 30 天： 3
总计 44
1条评论
Edit some pictures into your question of what you're looking at. The internals especially. And the back of the display.
由 Alisha C 完成的